BTS5215LAUMA1 vs ITS716GFUMA1 Vergleich
Detaillierter Direktvergleich von BTS5215LAUMA1 von Infineon und ITS716GFUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS5215LAUMA1 | ITS716GFUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,18 | $3,22 |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Number of Channels | 2 | 4 |
| On-State Resistance (RDS(on)) | 90 mΩ typical per channel | — |
| Continuous Output Current per Channel | 3.7 A | — |
| Operating Voltage Range | 8 V to 36 V | — |
| Standby Current | Very low (datasheet value [DATA_NEEDED: standby current uA]) | [DATA_NEEDED: Iq standby typical] |
| Input Logic Compatibility | CMOS-compatible, ground-referenced | — |
| Diagnostic Feedback | Status feedback per channel | — |
| MOSFET Technology | N-channel vertical power MOSFET with charge pump | — |
| Load Type Support | Resistive and inductive loads | — |
| Protection Features | Overcurrent, overtemperature, overvoltage, short-circuit, undervoltage | Overload, short-circuit, over-temperature, over-voltage, ESD |
| Demagnetization | Fast demagnetization of inductive loads | — |
| Gehäuse | PG-DSO-12-9 | PG-DSO-20-32 (20-pin SOIC, exposed pad) |
| Betriebstemperatur | -40C to +150C (TJ) [DATA_NEEDED: ambient range exact] | — |
| RoHS-Status | Compliant | Compliant |
| Ausgangskonfiguration | — | High-side (N-Channel MOSFET) |
| Continuous Current per Channel | — | 2.3 A |
| On-State Resistance (RON) per Channel | — | [DATA_NEEDED: Ron typical value] |
| Operating Voltage Range (Vbb) | — | 5 V to 36 V |
| Load Dump Tolerance | — | Up to 45 V |
| Input Logic Levels | — | CMOS/TTL compatible, parallel interface |
| Diagnostic Output | — | Open-drain fault flag, one per channel |
| PWM Capability | — | Up to 1 kHz |
| Betriebstemperaturbereich | — | -40 C to +85 C (industrial grade) |
| Wärmewiderstand, Sperrschicht-Umgebung | — | [DATA_NEEDED: theta_JA value] |
| Montageart | — | Surface Mount |
| MSL-Level | — | [DATA_NEEDED: MSL rating] |