BTS6143DAUMA1 vs BTS70021EPPXUMA1 Vergleich
Detaillierter Direktvergleich von BTS6143DAUMA1 von Infineon und BTS70021EPPXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
BTS6143DAUMA1 - 8A Smart High-Side Switch | Infineon | Automotive PROFET
BTS6143DAUMA1 ✓ AktivInfineon
BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon
BTS70021EPPXUMA1 ✓ AktivSpezifikationsvergleich
| Parameter | BTS6143DAUMA1 | BTS70021EPPXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,21 | $1,32 |
| Product Type | Smart High-Side Power Switch (PROFET) | — |
| Number of Channels | 1 | — |
| Topologie | High-Side | Smart High-Side Switch, N-Channel MOSFET |
| Ausgangskonfiguration | N-Channel vertical MOSFET | — |
| Nominal Load Voltage (Vbb) | 12 V (automotive) | — |
| Operating Voltage Range (Vbb) | [DATA_NEEDED: operating voltage range] | — |
| Continuous Output Current (IL) | 8 A (typical) | — |
| On-State Resistance (R_DS(on)) | [DATA_NEEDED: typical R_DS(on) in mOhm] | — |
| Short-Circuit Protection | Yes (with latch) | Yes (latched) |
| Current Limitation | Yes | — |
| Overload Protection | Yes | Yes (current limit) |
| Thermisches Abschalten | Yes (with auto-restart) | — |
| Overvoltage Protection | Yes (including load dump) | — |
| Loss-of-Ground Protection | Yes | — |
| Loss-of-Vbb Protection | Yes | — |
| Diagnostic Output | Yes (status/fault feedback) | — |
| Operating Temperature Range (Tj) | -40 C to +150 C | — |
| Gehäuse | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-TSDSO-14-22 (exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| Automotive Grade | Yes (AEC-Q100 qualified PROFET family) | — |
| Product Family | — | PROFET+2 12V |
| Maximum Continuous Load Current | — | 21 A |
| On-State Resistance (RDS(on)) | — | 2.6 mOhm typical |
| Operating Supply Voltage (Vbb) | — | 6 V to 18 V |
| Transient Supply Voltage | — | 28 V (load dump tolerant) |
| Standby Current | — | [DATA_NEEDED: typical uA value] |
| Current Sense Output (IS) | — | Analog proportional load current |
| Fault Output (DEN/IN) | — | Yes, latched |
| Reverse Polarity Protection | — | Yes (ReverSave) |
| Over-Temperature Protection | — | Yes (thermal shutdown with restart) |
| Over-Voltage Protection (Vbb clamp) | — | Yes |
| Load Dump Clamp Voltage | — | 41 V typical |
| Open-Load Detection | — | Yes (on-state and off-state) |
| PWM Capability | — | Yes, up to [DATA_NEEDED: max PWM frequency] |
| Betriebstemperaturbereich | — | -40 C to +150 C junction |
| Qualification | — | AEC-Q100 automotive qualified |
| RoHS-Status | — | Compliant (Green Product) |