BTS70021EPPXUMA1 vs ITS4142NHUMA1 Vergleich
Detaillierter Direktvergleich von BTS70021EPPXUMA1 von Infineon und ITS4142NHUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon
BTS70021EPPXUMA1 ✓ Aktiv
Spezifikationsvergleich
| Parameter | BTS70021EPPXUMA1 | ITS4142NHUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,32 | $0,88 |
| Product Family | PROFET+2 12V | — |
| Topologie | Smart High-Side Switch, N-Channel MOSFET | 1:1 N-Channel High-Side |
| Maximum Continuous Load Current | 21 A | — |
| On-State Resistance (RDS(on)) | 2.6 mOhm typical | — |
| Operating Supply Voltage (Vbb) | 6 V to 18 V | — |
| Transient Supply Voltage | 28 V (load dump tolerant) | — |
| Standby Current | [DATA_NEEDED: typical uA value] | — |
| Current Sense Output (IS) | Analog proportional load current | — |
| Fault Output (DEN/IN) | Yes, latched | — |
| Reverse Polarity Protection | Yes (ReverSave) | — |
| Overload Protection | Yes (current limit) | Yes |
| Short-Circuit Protection | Yes (latched) | — |
| Over-Temperature Protection | Yes (thermal shutdown with restart) | — |
| Over-Voltage Protection (Vbb clamp) | Yes | — |
| Load Dump Clamp Voltage | 41 V typical | — |
| Open-Load Detection | Yes (on-state and off-state) | — |
| PWM Capability | Yes, up to [DATA_NEEDED: max PWM frequency] | — |
| Betriebstemperaturbereich | -40 C to +150 C junction | — |
| Gehäuse | PG-TSDSO-14-22 (exposed pad) | PG-SOT223-4 (4-pin SOT-223) |
| Montageart | Surface Mount | Surface Mount |
| Qualification | AEC-Q100 automotive qualified | — |
| RoHS-Status | Compliant (Green Product) | Compliant |
| Manufacturer | — | Infineon Technologies |
| Product Type | — | Smart High-Side Power Switch |
| Anzahl der Ausgänge | — | 1 |
| Continuous Load Current | — | 1.4 A |
| On-Resistance (RDS(on)) | — | [DATA_NEEDED: typical RDS(on) at 25C] |
| Betriebsversorgungsspannung | — | 5 V to 34 V (load-dump tolerant to 45 V) |
| Logic Input Voltage | — | Logic-level, 3.3 V and 5 V compatible |
| Overvoltage Protection | — | Yes, including load dump |
| Undervoltage Shutdown | — | Yes, with auto-restart and hysteresis |
| Short Circuit Protection | — | Yes, with current limitation |
| Thermisches Abschalten | — | Yes |
| Diagnostic Feedback | — | Yes, open-drain status output |
| Inductive Load Switching | — | Yes, with internal clamping |
| Betriebstemperatur | — | -40C to +125C (junction) |
| AEC-Q100 Qualification | — | [DATA_NEEDED: automotive grade variant status] |