BTS70081EPAXUMA1 vs BTS70401EPAXUMA1 Vergleich
Detaillierter Direktvergleich von BTS70081EPAXUMA1 von Infineon und BTS70401EPAXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS70081EPAXUMA1 | BTS70401EPAXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,96 | $1,05 |
| Product Type | Smart High-Side Power Switch (PROFET) | Smart High-Side Power Switch |
| Topologie | 1:1 N-Channel High-Side Switch | — |
| Continuous Load Current | 10 A | — |
| On-State Resistance (RDS(on) typ.) | 9 mOhm | — |
| Betriebsversorgungsspannung | 6 V to 18 V | — |
| Load-Dump Survival Voltage | 28 V (per AEC-Q100) | — |
| Standby Current | [DATA_NEEDED: standby current in uA] | — |
| Current Limitation (typ.) | [DATA_NEEDED: IL(LIM) value] | — |
| Diagnostic Output | Open-drain status / current sense | — |
| Protection Features | Reverse battery, over-load, short-circuit, over-temperature, over-voltage clamp, ground loss | — |
| Betriebstemperaturbereich | -40 C to +150 C (Tj) | — |
| Gehäuse | PG-TSDSO-14-22 (14-pin, exposed pad) | PG-TSDSO-14-22 (14-pin, exposed pad) |
| Package Width | 3.90 mm (TSSOP-14 EP equivalent) | — |
| Montageart | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | Grade 1 (-40 C to +125 C) |
| RoHS-Status | Compliant | Compliant |
| MSL-Level | [DATA_NEEDED: MSL rating] | — |
| Lead-Free | Yes | — |
| Technology Family | — | PROFET+2 (SMART7) |
| Number of Channels | — | 1 |
| Typical On-Resistance (RDSon) | — | 0.019 Ohm |
| Nominal Load Current | — | 4.5 A |
| Load Voltage Range | — | 3.5 V to 28 V (12 V nominal) |
| Operating Supply Voltage (VS) | — | 3.5 V to 28 V |
| Input Logic Level | — | CMOS 3.3 V / 5 V compatible |
| Reverse Battery Protection | — | ReverSave (integrated) |
| Current Sense Output (IS) | — | Yes (analog) |
| Diagnostic Feedback | — | Fault flag + analog IS pin |
| Functional Safety | — | ISO 26262-ready |