BTS70402EPGXUMA1 vs BTG7003A1EPWXUMA2 Vergleich
Detaillierter Direktvergleich von BTS70402EPGXUMA1 von Infineon und BTG7003A1EPWXUMA2 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
BTG7003A1EPWXUMA2 - 15.7A PROFET Wire Guard High-Side Switch | Infineon
BTG7003A1EPWXUMA2 ✓ AktivSpezifikationsvergleich
| Parameter | BTS70402EPGXUMA1 | BTG7003A1EPWXUMA2 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $3,18 | $2,20 |
| Manufacturer | Infineon Technologies | — |
| Part Family | PROFET+2 (BTS70xxx series) | — |
| Funktion | Smart High-Side Power Switch | — |
| Number of Channels | 4 | 1 |
| Ausgangskonfiguration | High-side, N-channel MOSFET | — |
| Continuous Load Current per Channel | 3.5 A (typical) | — |
| On-State Resistance (Ron) per Channel | 65 mOhm typical | — |
| Operating Voltage Range | 6 V to 18 V nominal (load-dump tolerant to 40 V) | 6 V to 18 V |
| Logic Supply Voltage | 3.3 V / 5 V compatible MCU I/O | — |
| Protection Features | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection | — |
| Diagnostic Interface | SPI status register, current-sense feedback | — |
| Betriebstemperaturbereich | -40 °C to +150 °C junction | — |
| Gehäuse | PG-TSDSO-14 (exposed thermal pad) | PG-TSDSO-14-22 (exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS Compliance | Compliant | — |
| Switch Type | — | High-Side Power Switch |
| Configuration | — | 1:1 N-Channel |
| Maximum Continuous Load Current | — | 15.7 A |
| Load Dump Tolerance | — | 40 V |
| Idle Mode Quiescent Current | — | 50 µA |
| On-Resistance R_DS(on) | — | 10 mΩ (typ) |
| Control Input | — | Active High |
| Wire Protection | — | Integrated I²t |
| Functional Safety | — | ISO 26262 compliant |
| Betriebstemperatur | — | -40C to +150C (TJ) |
| RoHS-Status | — | Compliant |