CD4052BCN vs CD4052BE Vergleich
Detaillierter Direktvergleich von CD4052BCN von onsemi und CD4052BE von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | CD4052BCN | CD4052BE |
|---|---|---|
| Marke | onsemi | Texas Instruments |
| Kategorie | Interface ICs | Logic ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Device Type | 2-circuit analog switch | — |
| Multiplexer Configuration | 4:1 | — |
| ON Resistance | 240 ohm | — |
| Number of Channels | 4 channels | — |
| Control Type | Digital | — |
| OFF Leakage Current | Very low; exact value [DATA_NEEDED: OFF leakage current] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 3 V to 20 V |
| Input Signal Voltage Range | [DATA_NEEDED: analog input signal voltage range] | — |
| Technology | CMOS | — |
| Multiplexer/Demultiplexer Function | Multiplexer and demultiplexer | — |
| Gehäuse | 16-PDIP | 16-pin PDIP |
| Pin-Anzahl | 16 pins | — |
| Montageart | Through-hole | Through-hole |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Lebenszyklusstatus | Active | — |
| Product Type | — | Dual 4:1 analog multiplexer/demultiplexer |
| Number of Multiplexer Channels | — | 2 |
| Configuration | — | 4:1 |
| Maximum Supply Voltage | — | 20 V |
| Digital Signal Level Range | — | 3 V to 20 V |
| Typical On-Resistance | — | 240 ohm |
| On-Resistance at 15 V Peak-to-Peak | — | 125 ohm typical |
| Off Leakage Current | — | Very low; specific value not supplied |
| Address Decoding | — | Binary address decoding on chip |
| Logic-Level Conversion | — | Supported |
| Betriebstemperatur | — | [DATA_NEEDED: operating temperature range] |
| Analog Signal Range | — | [DATA_NEEDED: analog signal voltage range] |
| Leakage Current | — | [DATA_NEEDED: leakage current at specified test conditions] |
| Switching Time | — | [DATA_NEEDED: switching time] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |