CP2101 vs CP2102N-A02-GQFN28 Vergleich
Detaillierter Direktvergleich von CP2101 von Silicon Labs und CP2102N-A02-GQFN28 von Silicon Labs. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Silicon Labs
CP2101 - USB to UART Bridge, QFN-28, 5x5mm | Silicon Labs
CP2101 ⚠ Letzte Bestellmöglichkeit
Spezifikationsvergleich
| Parameter | CP2101 | CP2102N-A02-GQFN28 |
|---|---|---|
| Marke | Silicon Labs | Silicon Labs |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Letzte Kaufgelegenheit | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $3,55 | $2,35 |
| Funktion | USB to UART Bridge Controller | USB 2.0 to UART Bridge Controller |
| USB Standard | USB 2.0 Full-Speed (12 Mbps) | — |
| Integrated Transceiver | Yes | — |
| Integrated Oscillator | Yes (internal) | — |
| Integrated EEPROM | Yes (programmable) | — |
| Integrated Voltage Regulator | 5 V to 3 V, up to 100 mA | — |
| UART Data Rate | 300 bps to 921.6 kbps | — |
| Modem Control Signals | RTS, CTS, DTR, DSR, DCD, RI (full) | — |
| Operating Voltage (VBUS) | 4.0 V to 5.25 V | — |
| Regulated Output | 3.0 V to 3.6 V (3.3 V typical) | — |
| Gehäuse | MLP/QFN-28 (5 x 5 mm) | QFN-28 (5x5 mm) |
| Driver Support | Windows, macOS, Linux (virtual COM port) | — |
| Configuration | USB bus-powered or self-powered | — |
| Betriebstemperatur | [DATA_NEEDED: operating temperature] | -40C to +85C |
| RoHS-Status | Compliant | Compliant |
| Bus-Powered Capable | Yes | — |
| Protocol | — | USB 2.0 Full-Speed |
| Supply Voltage (VDD) | — | 3 V to 3.6 V |
| I/O Voltage (VIO) | — | 1.8 V to VDD |
| Maximum Baud Rate | — | 3 Mbaud |
| USB Speed | — | Full-Speed (12 Mbps) |
| Digital I/O Pins | — | 7 |
| Internal Regulator Output | — | 3.3 V |
| Internal Regulator Current | — | Up to 100 mA (external load) |
| Internal Oscillator | — | 48 MHz (no external crystal required) |
| ROM for Descriptors | — | 960 bytes (one-time programmable) |
| UART Data Bits | — | 5, 6, 7, or 8 (programmable) |
| Hardware Flow Control | — | RTS/CTS supported |
| Montageart | — | Surface Mount |