DG442DK vs DG442DY+ Vergleich
Detaillierter Direktvergleich von DG442DK von Maxim Integrated und DG442DY+ von Maxim Integrated. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Maxim Integrated
DG442DK - 85 Ohm Quad SPST Analog Switch | Maxim Integrated | 16-CDIP
DG442DK ✓ AktivSpezifikationsvergleich
| Parameter | DG442DK | DG442DY+ |
|---|---|---|
| Marke | Maxim Integrated | Maxim Integrated |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Number of Switches | 4 | — |
| Switch Configuration | Single-Pole Single-Throw (SPST), Normally Open | 1:1 SPST |
| Multiplexer Configuration | 1:1 | — |
| On-Resistance (RON) | 85 ohm max | — |
| On-Resistance Matching Between Switches | 4 ohm max | 4 ohm maximum |
| On-Resistance Flatness Over Signal Range | 9 ohm max | 9 ohm maximum |
| Off-Leakage Current | 500 pA | — |
| Versorgungsspannung | 15 V | — |
| Turn-On Time | 250 ns | — |
| Turn-Off Time | 170 ns | — |
| Gehäuse | 16-CDIP ceramic, 0.300 in (7.62 mm) lead pitch | 16-lead SOIC, 3.9 mm x 9.9 mm x 1.55 mm |
| Pin-Anzahl | 16 | — |
| Montageart | Through-hole | Surface mount |
| Signal Direction | Bidirectional (conducts equally in either direction) | — |
| Logic Input Levels | [DATA_NEEDED: logic input logic levels] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Versorgungsstrom | [DATA_NEEDED: supply current] | — |
| Signal Bandwidth | [DATA_NEEDED: signal bandwidth] | — |
| Charge Injection | [DATA_NEEDED: charge injection] | [DATA_NEEDED: charge injection] |
| RoHS-Status | unknown | [DATA_NEEDED: RoHS status] |
| Product Type | — | Quad SPST CMOS analog switch |
| Number of Circuits | — | 4 circuits |
| Typical On-Resistance | — | 85 ohm |
| Low-Leakage Specification | — | 80 pA |
| Power Consumption | — | 0.2 mW |
| Dual Supply Voltage Range | — | [DATA_NEEDED: dual supply voltage range] |
| Single Supply Voltage Range | — | [DATA_NEEDED: single supply voltage range] |
| Signal Voltage Range | — | [DATA_NEEDED: allowable signal voltage range] |
| Switch-On Time | — | [DATA_NEEDED: switch-on time] |
| Switch-Off Time | — | [DATA_NEEDED: switch-off time] |
| Channel-to-Channel Crosstalk | — | [DATA_NEEDED: channel-to-channel crosstalk] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |