DRV8434ERGER vs DRV8434ARGER Vergleich
Detaillierter Direktvergleich von DRV8434ERGER von Texas Instruments und DRV8434ARGER von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
DRV8434ERGER - 48V 2.5A Dual H-Bridge Motor Driver | Texas Instruments
DRV8434ERGER ✓ Aktiv
Spezifikationsvergleich
| Parameter | DRV8434ERGER | DRV8434ARGER |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Motor Drivers | Motor Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,59 | $2,65 |
| Motor Type | Bipolar stepper or dual brushed DC | Bipolar stepper |
| Number of H-Bridges | 2 | 2 |
| Betriebsversorgungsspannung | 4.5 V to 48 V | — |
| Continuous Output Current (per H-bridge) | 2.5 A | — |
| Peak Output Current | [DATA_NEEDED: peak current] | — |
| RDS(on) (HS + LS per bridge) | [DATA_NEEDED: RDS(on) value] | — |
| Integrated Current Sense | Yes (internal sense-FET, no external shunt) | — |
| Microstepping Indexer | Full-step to 1/256 native | — |
| Decay Modes | Smart Tune, Slow, Mixed, Fast (selectable) | — |
| Control Interface | STEP/DIR + M0/M1 | Step/Direction + SPI |
| Sleep Mode Pin | Yes (nSLEEP) | — |
| Fault Output | Yes (nFAULT, open-drain) | — |
| Protection Features | UVLO, OCP, short-circuit, open load, thermal shutdown, charge pump fault | UVLO, OCP, OVP, OTP, open load, stall |
| Gehäuse | VQFN-24 (RGE) 4x4 mm with exposed thermal pad | VQFN-24 (RGE) 4x4 mm with thermal pad |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperatur | -40 C to +125 C | -40 C to +125 C |
| MSL-Level | [DATA_NEEDED: MSL rating] | 2 (1 year floor life) |
| RoHS-Status | Compliant | Compliant |
| Ausgangskonfiguration | — | NMOS H-bridge |
| Supply Voltage (VM) | — | 4.5 V to 48 V |
| Full-Scale Output Current | — | 2.5 A per phase (peak) |
| RMS Output Current | — | 1.5 A per phase (typical) |
| Microstepping Resolution | — | Full-step to 1/256 step |
| Current Sensing | — | Integrated (no external sense resistor) |
| Stall Detection | — | Yes (GPIO output) |
| Decay Mode | — | Smart Tune (mixed decay) |
| Sleep Pin | — | Yes (nSLEEP, active low) |
| Fault Pin | — | Yes (nFAULT, active low, open-drain) |