DRV8886ATPWP vs DRV8806PWPR Vergleich
Detaillierter Direktvergleich von DRV8886ATPWP von Texas Instruments und DRV8806PWPR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
DRV8886ATPWP - 37V 2A Bipolar Stepper Driver | Texas Instruments
DRV8886ATPWP ✓ Aktiv
Spezifikationsvergleich
| Parameter | DRV8886ATPWP | DRV8806PWPR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Motor Drivers | Motor Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,04 | $3,20 |
| Motor Type | Bipolar Stepper | — |
| Number of Full H-Bridges | 2 | — |
| Load Voltage Rating (VM max) | 37 V | — |
| Minimum Operating VM | 8 V | — |
| Logic Supply Voltage (VCC) | 3 V to 5.5 V | — |
| Full-Scale Output Current | 2 A (per H-bridge, 25°C PCB-dependent) | — |
| RMS Output Current | 1.4 A (24 V, TA=25°C, PCB design-dependent) | — |
| Peak Output Current | 3 A | — |
| HS + LS On-Resistance (RDSon) | 550 mΩ | — |
| Control Interface | STEP / DIR (Hardware GPIO) | — |
| Microstepping Levels | Full to 1/16 step | — |
| Integrated Current Sense | Yes (internal sense, no external resistors) | — |
| AutoTune / Smart Tune Decay | Yes | — |
| Decay Modes | Smart tune, mixed, slow, fast (programmable) | — |
| Sleep Current | 20 µA | — |
| PWM Chopping Frequency | Up to 100 kHz | — |
| Betriebstemperaturbereich | -40°C to +125°C | — |
| Temperature Grade | Automotive | — |
| Gehäuse | HTSSOP-24 (PWP) PowerPAD | HTSSOP-16 (PWP) with PowerPAD |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 2 (per JEDEC J-STD-020) | 2 |
| Terminal Finish | Nickel-Palladium-Gold | — |
| Peak Reflow Temperature | 260°C | — |
| RoHS-Status | Compliant | Compliant |
| Number of Channels | — | 4 (quad low-side) |
| Ausgangskonfiguration | — | Low-side DMOS, open drain |
| Supply Voltage (VM) | — | 8.2 V to 38 V |
| Continuous Output Current per Channel | — | 2 A |
| Peak Output Current per Channel | — | 3 A |
| RDS(on) per Channel | — | 200 mOhm (typical) |
| Schnittstelle | — | SPI (serial, 3.3 V logic) |
| Open-Load Detection | — | Yes, via SPI |
| Überstromschutz | — | Yes, per channel |
| Thermisches Abschalten | — | Yes |
| Undervoltage Lockout | — | Yes |
| Built-in Clamp Diodes | — | Yes (freewheeling) |
| Betriebstemperatur | — | -40C to +85C |