EPC1441PS8 vs EPC1441PI8N Vergleich
Detaillierter Direktvergleich von EPC1441PS8 von Intel und EPC1441PI8N von Altera. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Altera
EPC1441PI8N - 440Kb OTP Config PROM, 8-PDIP | Altera / Intel
EPC1441PI8N ⚠ Letzte BestellmöglichkeitSpezifikationsvergleich
| Parameter | EPC1441PS8 | EPC1441PI8N |
|---|---|---|
| Marke | Intel | Altera |
| Kategorie | Memory ICs | Memory ICs |
| Lebenszyklusstatus | NRND | Letzte Kaufgelegenheit |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $3,32 | $3,55 |
| Product Type | Enhanced Configuration PROM (serial configuration memory) | — |
| Speichertyp | One-Time-Programmable Flash | OTP Configuration PROM (poly-fuse) |
| Memory Density | 440 Kbit | — |
| Schnittstelle | 4-pin serial (nCS, OE, DATA, DCLK) | — |
| Versorgungsspannung | 3.3 V typical (compatible with Altera FPGAs) | — |
| Compatible FPGA Families | APEX II, APEX 20K (including 20K, 20KC, 20KE), Mercury, ACEX 1K, FLEX 6000, FLEX 10KE, FLEX 10KA | FLEX10K, FLEX10KA, FLEX6000, APEX20K series |
| Gehäuse | SOIC-8 (PS8, 150-mil body) | 8-pin PDIP (Plastic DIP, through-hole) |
| Montageart | Surface Mount | Through-hole (THT) |
| Configuration Controller | Built-in (handles address counter, oscillator, tri-state DATA) | — |
| Output Driver | Tri-state on DATA pin | — |
| Configuration Speed | Higher DCLK rates vs legacy EPC PROMs (per Altera datasheet) | — |
| DC Input Absolute Min | -0.3 V (with -2.0 V undershoot tolerance < 20 ns) | — |
| DC Input Absolute Max | 7.0 V (with overshoot tolerance < 20 ns) | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| RoHS-Status | unknown | — |
| Programmability | OTP (one-time-programmable) | — |
| Memory Capacity | — | 440,800 bits (440 Kbit) |
| Configuration Interface | — | Altera Serial (PS) configuration |
| Supply Voltage VCC | — | 5.0 V nominal (4.75 V to 5.25 V) |
| Active Supply Current ICC | — | [DATA_NEEDED: typical active ICC] |
| Standby Supply Current ICCSTBY | — | approximately 50 uA |
| Programming Method | — | Off-board PROM programmer (poly-fuse OTP) |
| Configuration Time | — | <100 ms typical for FLEX10KA loading |
| Betriebstemperatur | — | -40C to +85C (industrial) |
| Pin-Anzahl | — | 8 |
| Lead-Free / RoHS | — | Non-RoHS (legacy through-hole); check suffix for Pb-free option |
| Family Position | — | Top-of-family (largest density: 440Kb) |
| Programming Voltage | — | [DATA_NEEDED: VPP programming voltage] |
| Endurance | — | One-time programmable (no reprogram cycles) |