EPC2TC32U-CAF48 vs EPC2T32U-CAF48 Vergleich
Detaillierter Direktvergleich von EPC2TC32U-CAF48 von Altera und EPC2T32U-CAF48 von Altera. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Altera
EPC2T32U-CAF48 - Altera/Intel 2Mb Config Device, 8MHz, 48-QFN | XAIPART
EPC2T32U-CAF48 ⚠ Letzte BestellmöglichkeitSpezifikationsvergleich
| Parameter | EPC2TC32U-CAF48 | EPC2T32U-CAF48 |
|---|---|---|
| Marke | Altera | Altera |
| Kategorie | Memory ICs | Memory ICs |
| Lebenszyklusstatus | NRND | Letzte Kaufgelegenheit |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $12,80 | $17,60 |
| Speichertyp | Non-volatile configuration flash | Non-volatile flash configuration memory |
| Configuration Memory Density | 32 Mbit | — |
| Supported FPGA Families | APEX II, APEX 20K, Mercury, Stratix, Cyclone, ACEX 1K, FLEX 10K | Cyclone, Cyclone II, Stratix, APEX 20K, ACEX 1K, Mercury, Excalibur |
| Programming Interface | IEEE 1149.1 JTAG (ISP) | IEEE 1149.1 (JTAG) / IEEE 1532 |
| Operating Voltage (VCC) | 3.0 V to 3.6 V (3.3V nominal) | — |
| I/O Bank Voltage (multiVolt) | 1.8 V / 2.5 V / 3.3 V / 5.0 V | — |
| Betriebstemperaturbereich | -40 C to +85 C (industrial grade) | — |
| Gehäuse | 32-pin TQFP | 48-pin QFN (CAF suffix) |
| Configuration Mode | Serial (FPP / PS / AS via JTAG ISP) | — |
| Decompression Support | Yes (Quartus-derived compressed bitstream) | — |
| Multi-Device JTAG Chain | Yes (nINIT_CONF / nSTATUS chaining) | — |
| Replacement for | EPC1 and EPC1441 legacy configuration devices | — |
| RoHS-Status | Compliant per distributor listings | Compliant |
| Lead-Free | Yes | — |
| MSL-Level | [DATA_NEEDED: MSL level] | [DATA_NEEDED: MSL level] |
| Memory Density | — | 2 Mb (2097152 bits) |
| Configuration Interface | — | Altera FPP (8-bit) / PS (4-wire) / AS (serial) |
| Maximum Configuration Clock (DCLK) | — | 8 MHz |
| Supply Voltage (VCC) | — | 3.3 V (typical) |
| I/O Tolerance | — | 5 V tolerant |
| Program/Erase Endurance | — | 10,000 cycles per sector minimum |
| Data Retention | — | 20 years minimum |
| Montageart | — | Surface Mount |
| Betriebstemperatur | — | -40 C to +85 C (industrial grade, "U") |
| Lead-Free Finish | — | Yes (CAF suffix indicates lead-free) |