EPC2TC32U vs EPC2TC32UCF48 Vergleich
Detaillierter Direktvergleich von EPC2TC32U von Altera und EPC2TC32UCF48 von Intel. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | EPC2TC32U | EPC2TC32UCF48 |
|---|---|---|
| Marke | Altera | Intel |
| Kategorie | FPGA & CPLD | Memory ICs |
| Lebenszyklusstatus | NRND | NRND |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $5,85 | $10,85 |
| Funktion | Serial Configuration Device for SRAM-based LUT FPGAs | — |
| Speichergröße | 1.6 Mbit | — |
| Configuration Interface | Altera Passive Serial (DCLK / DATA0 / nCONFIG / nSTATUS / CONF_DONE) | Altera serial PROM interface (DCLK, DATA, nCONFIG, nSTATUS, CONF_DONE) |
| JTAG Support | Yes (IEEE 1149.1 boundary-scan, ISP) | — |
| Versorgungsspannung | 3.0 V to 3.6 V or 4.75 V to 5.25 V | — |
| Betriebstemperatur | -40 C to +85 C | 0C to +70C (commercial) |
| Gehäuse | 32-pin QFP (CAF48, lead-free) | 48-pin TQFP (7x7 mm) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL level] | [DATA_NEEDED: MSL rating] |
| RoHS-Status | Compliant (lead-free / RoHS per distributor data) | [DATA_NEEDED: confirm RoHS compliance] |
| Lead-Free Finish | Yes (U suffix) | — |
| Supported FPGA Families | Altera Stratix, Cyclone, APEX, ACEX, Mercury, Excalibur | — |
| Configuration Mode | Passive Serial (PS), JTAG | — |
| Configuration Time | [DATA_NEEDED: typical configuration time] | — |
| Programming Cycles | [DATA_NEEDED: minimum program/erase cycles] | — |
| Data Retention | [DATA_NEEDED: minimum data retention years] | — |
| Speichertyp | — | Non-volatile configuration PROM (CMOS Flash-based) |
| Memory Density | — | 1.6 Mbit (1.6 Mb / 32 Mbit raw) |
| Memory Configuration | — | Serial configuration bitstream storage |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V (3.3 V typical) |
| Supply Voltage (VCCIO) | — | 1.8 V / 2.5 V / 3.3 V (bank-level) |
| Output Drive Current (VCCIO) | — | [DATA_NEEDED: IOH/IOL at 3.3 V VCCIO] |
| Programming Interface | — | IEEE Std. 1149.1 JTAG (in-system programmable) |
| Supported Configuration Modes | — | FPP, AS, PS, JTAG (mode dependent on target FPGA MSEL pins) |
| Daisy Chain Support | — | Yes (multi-device cascade for >16 Mbit FPGAs) |
| Maximum Cascaded Capacity | — | Up to 16 Mbit total across chain |
| Lead Free | — | [DATA_NEEDED: confirm lead-free] |