EPC2TC32UCAF vs EPC2TC32UCF48 Vergleich
Detaillierter Direktvergleich von EPC2TC32UCAF von Altera und EPC2TC32UCF48 von Intel. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | EPC2TC32UCAF | EPC2TC32UCF48 |
|---|---|---|
| Marke | Altera | Intel |
| Kategorie | FPGA & CPLD | Memory ICs |
| Lebenszyklusstatus | Obsolete | NRND |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $9,95 | $10,85 |
| Device Type | Configuration PROM (CPLD-style boot memory) | — |
| Memory Density | 1.6 Mbit | 1.6 Mbit (1.6 Mb / 32 Mbit raw) |
| Supported FPGA Families | Altera APEX, Cyclone, Stratix, FLEX (LUT devices) | — |
| Supply Voltage (VCC) | 3.0 V to 3.6 V | 3.0 V to 3.6 V (3.3 V typical) |
| I/O Logic Levels | 3.3 V / 2.5 V compatible | — |
| Configuration Interface | FLEX passive serial / passive parallel synchronous / passive parallel asynchronous | Altera serial PROM interface (DCLK, DATA, nCONFIG, nSTATUS, CONF_DONE) |
| Programming Interface | IEEE 1149.1 (JTAG) in-system programmable | IEEE Std. 1149.1 JTAG (in-system programmable) |
| Daisy-Chain Support | Yes (via nCASC pin, multi-device FLEX chain) | — |
| Compression Support | Altera bitstream compression compatible | — |
| Gehäuse | 32-pin TQFP (CAF48), 7x7 mm | 48-pin TQFP (7x7 mm) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | 0C to +70C (commercial) |
| MSL-Level | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL rating] |
| RoHS-Status | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: confirm RoHS compliance] |
| Lead-Free | [DATA_NEEDED: lead-free status] | — |
| Halogenfrei | [DATA_NEEDED: halogen-free status] | — |
| Speichertyp | — | Non-volatile configuration PROM (CMOS Flash-based) |
| Memory Configuration | — | Serial configuration bitstream storage |
| Supply Voltage (VCCIO) | — | 1.8 V / 2.5 V / 3.3 V (bank-level) |
| Output Drive Current (VCCIO) | — | [DATA_NEEDED: IOH/IOL at 3.3 V VCCIO] |
| Supported Configuration Modes | — | FPP, AS, PS, JTAG (mode dependent on target FPGA MSEL pins) |
| Daisy Chain Support | — | Yes (multi-device cascade for >16 Mbit FPGAs) |
| Maximum Cascaded Capacity | — | Up to 16 Mbit total across chain |
| Lead Free | — | [DATA_NEEDED: confirm lead-free] |