EPC2TC32UCF48 vs EPC2TC32HAF48 Vergleich
Detaillierter Direktvergleich von EPC2TC32UCF48 von Intel und EPC2TC32HAF48 von Intel. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | EPC2TC32UCF48 | EPC2TC32HAF48 |
|---|---|---|
| Marke | Intel | Intel |
| Kategorie | Memory ICs | Memory ICs |
| Lebenszyklusstatus | NRND | NRND |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $10,85 | $15,20 |
| Speichertyp | Non-volatile configuration PROM (CMOS Flash-based) | — |
| Memory Density | 1.6 Mbit (1.6 Mb / 32 Mbit raw) | — |
| Memory Configuration | Serial configuration bitstream storage | — |
| Supply Voltage (VCC) | 3.0 V to 3.6 V (3.3 V typical) | 3.3 V (typical) |
| Supply Voltage (VCCIO) | 1.8 V / 2.5 V / 3.3 V (bank-level) | — |
| Output Drive Current (VCCIO) | [DATA_NEEDED: IOH/IOL at 3.3 V VCCIO] | — |
| Programming Interface | IEEE Std. 1149.1 JTAG (in-system programmable) | — |
| Configuration Interface | Altera serial PROM interface (DCLK, DATA, nCONFIG, nSTATUS, CONF_DONE) | Altera EPC serial (DATA, DCLK, nCONFIG, nSTATUS, nCASC) |
| Supported Configuration Modes | FPP, AS, PS, JTAG (mode dependent on target FPGA MSEL pins) | — |
| Daisy Chain Support | Yes (multi-device cascade for >16 Mbit FPGAs) | — |
| Maximum Cascaded Capacity | Up to 16 Mbit total across chain | — |
| Betriebstemperatur | 0C to +70C (commercial) | [DATA_NEEDED: operating temperature grade] |
| Gehäuse | 48-pin TQFP (7x7 mm) | TQFP-48 (7x7x1.0 mm) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL rating] |
| RoHS-Status | [DATA_NEEDED: confirm RoHS compliance] | — |
| Lead Free | [DATA_NEEDED: confirm lead-free] | — |
| Speichergröße | — | 32 Mbit (4 Mbyte) |
| Funktion | — | FPGA Configuration PROM for SRAM-based LUT devices |
| In-System Programmability | — | Yes, via JTAG (IEEE 1149.1) |
| Cascade Support | — | Yes, multi-device daisy-chain via nCASC |
| FPGA Compatibility | — | Altera/Intel Cyclone, Stratix, APEX, ACEX families |
| Lead-Free / RoHS | — | [DATA_NEEDED: lead-free / RoHS status] |
| Programming Cycles | — | [DATA_NEEDED: program/erase endurance] |
| Configuration Clock (DCLK) | — | [DATA_NEEDED: maximum DCLK frequency] |
| Configuration Time (typical) | — | [DATA_NEEDED: configuration time] |