EPC8Q100 vs EPC8QI100N Vergleich
Detaillierter Direktvergleich von EPC8Q100 von Altera und EPC8QI100N von Altera. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | EPC8Q100 | EPC8QI100N |
|---|---|---|
| Marke | Altera | Altera |
| Kategorie | FPGA & CPLD | EEPROM |
| Lebenszyklusstatus | Obsolete | NRND |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $10,85 | $16,90 |
| Memory Density | 8 Mbit (8,388,608 bits) | — |
| Speichertyp | NOR Flash, One-Time-Programmable (OTP) via JTAG | — |
| Configuration Interface | Altera EPC serial (DATA, DCLK, nCS, nINIT_CONF, nSTATUS, DONE) | Altera serial (4-wire: DATA, DCLK, nCS, nINIT_CONF) |
| Supply Voltage VCC | 5.0 V (3.3 V core generated on-chip) | — |
| Internal Core Voltage | 3.3 V (on-chip LDO) | — |
| Maximum EPC Clock | 33 MHz | — |
| Programmability | In-system via IEEE 1149.1 JTAG | — |
| FPGA Compatibility | APEX 20K, APEX II, Cyclone, Cyclone II, Stratix, Stratix GX | — |
| Configuration Mode Support | FPP, PS, AS, JTAG (FPGA-dependent) | — |
| Program/Erase Endurance | [DATA_NEEDED: cycle count] | — |
| Data Retention | [DATA_NEEDED: minimum years] | — |
| Betriebstemperaturbereich | 0 C to +70 C (commercial) | — |
| Storage Temperature Range | [DATA_NEEDED: range] | — |
| Gehäuse | 100-pin PQFP (20 x 14 mm) | 100-PQFP / 100-BQFP (20 x 14 mm) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: level] | — |
| Lead-Free / RoHS | [DATA_NEEDED: status] | Yes (per distributor listings) |
| Manufacturer | — | Altera (Intel) |
| Part Family | — | EPC8 (Enhanced Configuration) |
| Device Type | — | Configuration PROM for SRAM-based FPGAs |
| Speichergröße | — | 8 Mbit (8,388,608 bits) |
| Programmable Type | — | In System Programmable (Flash) |
| Maximum Configuration Clock | — | 50 MHz |
| On-Chip Decompression | — | Yes (Altera compression algorithm) |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| Betriebstemperatur | — | -40 °C to +85 °C (Industrial) |
| Pin-Anzahl | — | 100 |
| JTAG (IEEE 1149.1) ISP | — | Supported |
| Multi-Device Daisy-Chain | — | Supported |
| Target FPGA Families | — | ACEX 1K, APEX 20K, APEX II, Arria GX, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, Mercury, Stratix, Stratix GX, Stratix II, Stratix II GX |
| Packaging | — | Tray |