EPC8Q1100 vs EPC8QI100 Vergleich
Detaillierter Direktvergleich von EPC8Q1100 von Altera und EPC8QI100 von Intel. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Altera
EPC8Q1100 - 8 Mbit Enhanced Config Device for SRAM FPGAs | Altera
EPC8Q1100 ⚠ Letzte BestellmöglichkeitSpezifikationsvergleich
| Parameter | EPC8Q1100 | EPC8QI100 |
|---|---|---|
| Marke | Altera | Intel |
| Kategorie | FPGA & CPLD | Memory ICs |
| Lebenszyklusstatus | Letzte Kaufgelegenheit | Obsolete |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $25,90 | $10,85 |
| Product Type | Enhanced Configuration Device (boot PROM) | — |
| Memory Density | 8 Mbit (8,388,608 bits) | — |
| Supported FPGAs | Altera SRAM-based LUT FPGAs (Cyclone, Stratix, APEX, ACEX, Mercury, Excalibur) | — |
| Configuration Interface | Altera Enhanced Config serial interface (DATA, DCLK, nCONFIG, nSTATUS, CONF_DONE) | — |
| Max DCLK Frequency | 33 MHz (Fast-mode) | — |
| Supply Voltage (VCC) | 3.0 V to 3.6 V | — |
| Supply Voltage (VCCIO for FPGA interface) | 1.8 V / 2.5 V / 3.3 V tolerant | — |
| Programming Interface | IEEE Std 1149.1 JTAG (ISP) + serial byte-blaster mode | — |
| In-System Programmable | Yes | — |
| Gehäuse | 100-pin PQFP (plastic quad flat pack) | 100-PQFP (20 x 14 mm) |
| Betriebstemperatur | -40 C to +85 C (industrial) | -40C to +85C (industrial) |
| Operating Current (active read) | [DATA_NEEDED: active ICC] | — |
| Standby Current | [DATA_NEEDED: ICC standby] | — |
| Endurance (program/erase cycles) | [DATA_NEEDED: endurance cycles] | — |
| Data Retention | [DATA_NEEDED: data retention years] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Non-compliant (legacy PQFP, lead-bearing) |
| Lead-Free | [DATA_NEEDED: lead-free] | — |
| Speichertyp | — | Flash (NOR, Enhanced Configuration PROM) |
| Speichergröße | — | 8 Mbit |
| Supply Voltage (Core) | — | 3.3 V |
| Supply Voltage (I/O) | — | 3.3 V |
| Schnittstelle | — | Altera FPGA configuration serial/parallel (FPP) + JTAG (IEEE 1149.1) |
| In-System Programmability | — | IEEE Std. 1532 compliant |
| Programming Language | — | Jam STAPL |
| Boundary Scan | — | JTAG boundary-scan test supported |
| Data Compression | — | Yes (increases effective capacity) |
| Configuration Controller | — | On-chip, dedicated to Altera FPGAs |
| Initiate-Configuration Pin | — | nINIT_CONF (private JTAG instruction) |
| Montageart | — | Surface Mount |
| Compatible FPGAs | — | Stratix, Stratix II, APEX II, APEX 20K, Mercury, ACEX 1K, FLEX 10K, Cyclone, Cyclone II, Arria GX, Stratix GX, Stratix II GX |