EPM9560RC208-7 vs EPM9560RC208-10 Vergleich
Detaillierter Direktvergleich von EPM9560RC208-7 von Altera und EPM9560RC208-10 von Intel. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | EPM9560RC208-7 | EPM9560RC208-10 |
|---|---|---|
| Marke | Altera | Intel |
| Kategorie | FPGA & CPLD | FPGA & CPLD |
| Lebenszyklusstatus | NRND | Obsolete |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $18,90 | $15,40 |
| Family | MAX 9000 | MAX 9000 |
| Device Type | EPLD / CPLD | CPLD (Complex Programmable Logic Device) |
| Usable Gates | 560 | 12,000 |
| Macrocells | 16 | 560 |
| Logic Array Blocks (LABs) | 4 | 16 |
| User I/O Pins | 208 | — |
| Pin-to-Pin Delay (tPD) | 7 ns (speed grade -7) | 10 ns |
| Maximum Frequency (fMAX) | [DATA_NEEDED: fMAX value] | [DATA_NEEDED: internal toggle frequency in MHz] |
| Supply Voltage (VCCINT) | 5.0 V | 5.0 V |
| Supply Voltage (VCCIO) | 5.0 V (TTL) or 3.3 V (LVCMOS with level translator) | — |
| Process Technology | 0.65 um CMOS EEPROM | 0.30 µm CMOS EEPROM |
| Configuration Memory | Non-volatile on-chip EEPROM (no boot PROM required) | EEPROM (in-system programmable via JTAG) |
| Programming Interface | JTAG (IEEE 1149.1) + Altera ISP | — |
| Gehäuse | 208-pin Power Quad Flat Pack (RQFP-208) | 208-pin RQFP (Plastic Quad Flat Pack) |
| Betriebstemperatur | 0C to +70C (commercial) / -40C to +85C (industrial) | 0C to +70C (commercial) |
| Output Drive Current | 160 mA DC sink per pin | — |
| RoHS-Status | Compliant (ROHS3 per distributor listing) | [DATA_NEEDED: not stated in retrieved distributor listings] |
| Maximum User I/O Pins | — | 212 (208-pin package variant) |
| I/O Standards Supported | — | 5.0 V TTL, 3.3 V LVTTL, 2.5 V (multiVolt I/O) |
| Montageart | — | Surface Mount |
| Lead-Free | — | [DATA_NEEDED: confirm lead-free status -10 suffix is conventional Pb-containing] |
| Programmability | — | JTAG (IEEE 1149.1) in-system programming |