ICE3A2065Z vs L6566BHTR Vergleich
Detaillierter Direktvergleich von ICE3A2065Z von Infineon und L6566BHTR von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
L6566BHTR - Multimode SMPS PWM Controller, 16-SO | STMicroelectronics
L6566BHTR ✓ AktivSpezifikationsvergleich
| Parameter | ICE3A2065Z | L6566BHTR |
|---|---|---|
| Marke | Infineon | STMicroelectronics |
| Kategorie | DC-DC Converters | Voltage Regulators |
| Lebenszyklusstatus | NRND | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,58 | $1,44 |
| Topologie | Flyback (off-line SMPS current-mode controller) | Offline flyback (forward-capable) |
| Schaltfrequenz | 100 kHz fixed | — |
| Integrated Power Switch | 650V Depletion CoolMOS | — |
| Drain-Source Breakdown Voltage (VDS max) | 650 V | — |
| On-Resistance (RDS(on) max) | 1.05 ohm | — |
| Maximum Drain Current (ID max) | 2.0 A pulsed | — |
| Maximum Output Power | 28 W (typical adapter application) | — |
| VCC Supply Voltage Range | 8.5 V to 21 V | — |
| Quiescent Current (ICC) | 7.1 mA | — |
| Betriebs-Sperrschichttemperatur | -25 °C to +130 °C | — |
| Thermal Resistance Junction-to-Ambient (RthJA) | 96 K/W | — |
| ESD Protection (HBM) | 3.0 kV | — |
| Burst Mode | Active Burst Mode (standby < 100 mW at no load) | — |
| Gehäuse | PG-DIP-7-1 (7-pin PDIP through-hole) | 16-SOIC (0.154", 3.90 mm width) |
| Montageart | Through-Hole (THT) | Surface Mount |
| Lead-Free / RoHS | Compliant (per device spec excerpt) | — |
| Recommended Replacement | ICE3A2065ELJ (new design only; different package) | — |
| Product Type | — | Current-mode primary PWM controller |
| Operating Mode | — | Multimode: fixed-frequency + quasi-resonant valley-switching |
| Input Voltage (VCC) | — | 8 V to 23 V |
| Input Voltage (Mains) | — | Up to 800 V on HV start-up pin |
| Switching Frequency Range | — | 10 kHz to 300 kHz |
| Ruhestrom | — | 3 mA |
| High-Voltage Start-up | — | On-board 800 V start-up cell |
| Output Power Capability | — | Up to 750 mW (controller dissipation) |
| Control Method | — | Peak current-mode with line feed-forward |
| Packaging | — | Cut Tape (CT) / Tape & Reel |
| Betriebstemperatur | — | -40 °C to +150 °C (junction) |
| Halogenfrei | — | Compliant |
| RoHS | — | Compliant |