ICS501M vs ICS514M Vergleich
Detaillierter Direktvergleich von ICS501M von Renesas Electronics und ICS514M von Renesas Electronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | ICS501M | ICS514M |
|---|---|---|
| Marke | Renesas Electronics | Renesas Electronics |
| Kategorie | Clock & Timing | Clock & Timing |
| Lebenszyklusstatus | Unknown | Aktiv |
| Device Type | LOCO PLL clock multiplier and clock-generator IC | Clock Generator, Fanout Distribution IC |
| Input Frequency Range | 2 MHz to 50 MHz | — |
| Maximum Output Frequency | 160 MHz | 140 MHz |
| Ausgangstyp | High-frequency clock output | — |
| Clocking Architecture | Phase-locked loop | — |
| Reference Input | Lower-frequency crystal or clock input | — |
| Gehäuse | 8-SOIC, 0.154 inch width, 3.90 mm width | 8-SOIC (0.154 inch, 3.90 mm width) |
| Anzahl der Pins | 8 pins | — |
| Montageart | Surface mount | Surface Mount |
| Terminal Form | Gull wing | — |
| Package Shape | Rectangular | — |
| Kategorie | Clock generators, PLLs, frequency synthesizers | — |
| Input Clock or Crystal Support | Crystal or clock input | — |
| Maximum Output Class | High-frequency digital clock | — |
| Manufacturer | Renesas Electronics Corporation | — |
| Datasheet Status | Manufacturer datasheet reference available | — |
| Operating Voltage | [DATA_NEEDED: operating voltage] | — |
| Output Jitter | [DATA_NEEDED: output jitter] | — |
| Phase Noise | [DATA_NEEDED: phase noise] | — |
| Output Duty Cycle | [DATA_NEEDED: output duty cycle] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | 0°C to 70°C |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| PLL Architecture | — | Single PLL |
| Anzahl der Ausgänge | — | 1 |
| Supported Reference Input | — | 14.31818 MHz crystal or clock input |
| Supply Voltage Range | — | 3 V to 5.5 V |
| Series | — | LOCO |
| PLL Disable Behavior | — | CLK output stops low when S1 = S0 = 0 |
| Reference Output During PLL Disable | — | Crystal oscillator and REF output remain active |
| Output Configuration Control | — | S1 and S0 control inputs |
| Input Pin Designation | — | I = Input; TI = Tri-Level Input; O = Output; P = Power Supply Connection |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Clock Output Jitter | — | [DATA_NEEDED: clock output jitter] |
| Clock Output Rise Time | — | [DATA_NEEDED: clock output rise time] |
| Clock Output Fall Time | — | [DATA_NEEDED: clock output fall time] |
| Ruhestrom | — | [DATA_NEEDED: quiescent current] |