ICS551M vs ICS514M Vergleich
Detaillierter Direktvergleich von ICS551M von Renesas Electronics und ICS514M von Renesas Electronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | ICS551M | ICS514M |
|---|---|---|
| Marke | Renesas Electronics | Renesas Electronics |
| Kategorie | Clock & Timing | Clock & Timing |
| Lebenszyklusstatus | Unknown | Aktiv |
| Product Type | Clock Fanout Buffer (Distribution) IC | — |
| Fanout Ratio | 1:4 | — |
| Maximum Frequency | 160 MHz | — |
| Input Technology | CMOS | — |
| Output Technology | CMOS | — |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| Anzahl der Ausgänge | 4 | 1 |
| Number of Inputs | 1 | — |
| Gehäuse | 8-SOIC | 8-SOIC (0.154 inch, 3.90 mm width) |
| Package Width | 0.154 in (3.90 mm) | — |
| Montageart | Surface Mount | Surface Mount |
| Logic Family | CMOS | — |
| Funktion | Single-input to four-output clock buffer | — |
| Product Family | ICS ClockBlocks | — |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | — |
| Input Rise/Fall Time | [DATA_NEEDED: input rise and fall time] | — |
| Output Rise/Fall Time | [DATA_NEEDED: output rise and fall time] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Output Skew | [DATA_NEEDED: output skew] | — |
| Input/Output Current | [DATA_NEEDED: input and output current] | — |
| Versorgungsstrom | [DATA_NEEDED: supply current] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Device Type | — | Clock Generator, Fanout Distribution IC |
| PLL Architecture | — | Single PLL |
| Maximum Output Frequency | — | 140 MHz |
| Supported Reference Input | — | 14.31818 MHz crystal or clock input |
| Betriebstemperaturbereich | — | 0°C to 70°C |
| Series | — | LOCO |
| PLL Disable Behavior | — | CLK output stops low when S1 = S0 = 0 |
| Reference Output During PLL Disable | — | Crystal oscillator and REF output remain active |
| Output Configuration Control | — | S1 and S0 control inputs |
| Input Pin Designation | — | I = Input; TI = Tri-Level Input; O = Output; P = Power Supply Connection |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Clock Output Jitter | — | [DATA_NEEDED: clock output jitter] |
| Clock Output Rise Time | — | [DATA_NEEDED: clock output rise time] |
| Clock Output Fall Time | — | [DATA_NEEDED: clock output fall time] |
| Ruhestrom | — | [DATA_NEEDED: quiescent current] |