IFX9201SGAUMA1 vs TLE9104SHXUMA1 Vergleich
Detaillierter Direktvergleich von IFX9201SGAUMA1 von Infineon und TLE9104SHXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | IFX9201SGAUMA1 | TLE9104SHXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Motor Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,05 | $3,72 |
| Topologie | Full H-Bridge (2 half-bridges) | 1:1 N-Channel Low-Side Switch |
| Supply Voltage Range | 5 V to 36 V | — |
| Continuous Output Current | 6 A | — |
| Peak Output Current | [DATA_NEEDED: peak current] | — |
| RDS(on) per Switch (typ) | [DATA_NEEDED: RDS(on)] | — |
| Control Interface | PWM, DIR, SPI diagnostics | — |
| PWM Frequency (max) | 25 kHz | — |
| SPI Clock Frequency (max) | 4 MHz | — |
| Operating Temperature Range (TJ) | -40 C to +125 C | — |
| Gehäuse | PG-DSO-12-17 (12-BSOP with Exposed Pad) | PG-DSO-20-88 (20-pin BFSOP with exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL level] | MSL3 (per JEDEC J-STD-020) |
| Protection Features | UVLO, OCP, OTP, short-circuit, open-load detection | Over-current, Over-temperature, Over-load, short-to-ground, open-load detection |
| RoHS-Status | Compliant | — |
| Target Applications | DC motors, inductive loads, power tools, home appliances, building automation | — |
| Product Type | — | Multi-Channel Low-Side Power Switch |
| Number of Channels | — | 4 |
| Load Current per Channel | — | 3 A (continuous) |
| Supply Voltage Range (VDD) | — | 4.5 V to 28 V |
| Logic Reference (VIO) | — | 3.3 V / 5 V compatible |
| Communication Interface | — | 16-bit SPI |
| R_DS(on) per Channel | — | [DATA_NEEDED: typical R_DS(on) in mohm] |
| Betriebstemperatur | — | -40 °C to +150 °C (junction) |
| Diagnostic Output | — | SPI status registers (per-channel fault flags) |
| Automotive Qualification | — | AEC-Q100 qualified (automotive grade) |
| RoHS / Lead-Free | — | RoHS compliant, lead-free |
| Reset Pin (RESN) | — | Active-low with configurable reset duration |