INA101HP-1 vs INA101AG Vergleich

Detaillierter Direktvergleich von INA101HP-1 von Texas Instruments und INA101AG von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Texas Instruments
INA101HP-1 INA101HP-1 Instrumentation Amplifier | Texas Instruments

INA101HP-1 Instrumentation Amplifier | Texas Instruments

INA101HP-1 ✓ Aktiv
Texas Instruments
INA101AG INA101AG - High Accuracy Instrumentation Amplifier | TI

INA101AG - High Accuracy Instrumentation Amplifier | TI

INA101AG ✓ Aktiv

Spezifikationsvergleich

Parameter INA101HP-1 INA101AG
Marke Texas Instruments Texas Instruments
Kategorie Amplifier ICs Amplifier ICs
Lebenszyklusstatus Aktiv Aktiv
Product Type Instrumentation amplifier —
Amplifier Configuration 1 circuit —
Internal Operational Amplifier Count 3 amplifiers —
Gain Range 1 V/V to 1000 V/V —
Gain-Bandwidth Product at Unity Gain 300 kHz —
Input Offset Voltage 25 uV maximum —
Input Voltage Drift 0.25 uV/degree C maximum —
Low Nonlinearity 0.002% —
Input Noise 13 nV/sqrt(Hz) —
Input Impedance 10 Gohm 10^10 ohm
Versorgungsspannung 5 V to 20 V —
Common-Mode Rejection at 60 Hz [DATA_NEEDED: minimum CMRR value in dB] —
Package Type 14-pin PDIP —
Montageart Through-hole Through Hole
Integrated Precision Resistors Laser-trimmed metal-film resistors —
RoHS-Status unknown —
REACH Status unknown —
Betriebstemperaturbereich [DATA_NEEDED: operating temperature range in degrees C] —
Maximum Total Supply Voltage [DATA_NEEDED: maximum total supply voltage in V] —
Input Common-Mode Voltage Range [DATA_NEEDED: input common-mode voltage range in V] —
Output Voltage Swing [DATA_NEEDED: output voltage swing in V] —
Amplifier Type — Instrumentation Amplifier
Number of Channels — 1
Input Offset Voltage (max) — 25 uV
Offset Drift (max) — 0.25 uV/C
Nonlinearity (max) — 0.002%
Input Noise Density — 13 nV/rtHz
Common-Mode Rejection — 106 dB at 60 Hz
Bandwidth — 300 kHz
Slew Rate — 0.04 V/us
Supply Voltage Range — +/-5 V to +/-20 V
Gehäuse — 14-CDIP (0.300", 7.62 mm)
Betriebstemperatur — [DATA_NEEDED: operating temperature range]
Architecture — Three-op-amp, laser-trimmed metal-film resistors
Applications — Strain gages, thermocouples, RTDs, remote transducers

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern