INA101HP vs INA101SG Vergleich
Detaillierter Direktvergleich von INA101HP von Texas Instruments und INA101SG von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
INA101SG - Military High Accuracy Instrumentation Amplifier | TI
INA101SG ✗ AbgekündigtSpezifikationsvergleich
| Parameter | INA101HP | INA101SG |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Ende des Lebenszyklus |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $8,40 | $9,45 |
| Amplifier Type | Instrumentation Amplifier | — |
| Number of Circuits | 1 | — |
| Offset Voltage (Max) | 25 uV | — |
| Offset Drift (Max) | 0.25 uV/C | — |
| Nonlinearity (Max) | 0.002% | — |
| Input Noise Density | 13 nV/Hz | — |
| Input Impedance | 10^10 ohm | 10^10 ohm |
| Slew Rate | 0.04 V/us | — |
| Bandwidth | 300 kHz | 0.3 MHz |
| Supply Voltage Range | +/-5 V to +/-20 V | [DATA_NEEDED: Supply Voltage Range] |
| Gain Range | 1 V/V to 1000 V/V (single resistor RG) | — |
| CMRR | High CMR at 60 Hz | — |
| Architecture | Bipolar, three-op-amp topology | — |
| Gehäuse | 14-PDIP (N), through-hole | 14-pin Ceramic DIP (CDIP-14) |
| Montageart | Through Hole | Through-Hole |
| Betriebstemperatur | [DATA_NEEDED: Operating Temperature Range] | — |
| RoHS-Status | [DATA_NEEDED: RoHS Status] | [DATA_NEEDED: RoHS Status] |
| Funktion | — | High Accuracy Instrumentation Amplifier |
| Topologie | — | Three-op-amp with laser-trimmed metal-film resistors |
| Input Offset Voltage (max) | — | 25 uV |
| Offset Voltage Drift (max) | — | 0.25 uV/C |
| Nonlinearity | — | 0.002% |
| Input Noise | — | 13 nV/Hz |
| Common-Mode Rejection | — | High CMR at 60 Hz (value per datasheet) |
| Gain Setting | — | Single external resistor |
| Temperature Grade | — | Military |
| Number of Terminals | — | 14 |
| Betriebstemperaturbereich | — | [DATA_NEEDED: Operating Temperature Range] |