INA116PA vs INA116PAG4 Vergleich
Detaillierter Direktvergleich von INA116PA von Texas Instruments und INA116PAG4 von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | INA116PA | INA116PAG4 |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Obsolete |
| Amplifier Type | Instrumentation Amplifier | — |
| Number of Channels | 1 | — |
| Input Bias Current (typ) | 3 fA at 25C | — |
| Input Bias Current (at 85C) | 25 fA | — |
| Input Offset Voltage (max) | 2 mV | — |
| Gain Range | 1 V/V to 1000 V/V | 1 to 1000 |
| CMRR (min) | 86 dB | — |
| Input Noise Density at 1 kHz | 28 nV/sqrt(Hz) | — |
| Ruhestrom | 1 mA | — |
| Supply Voltage Range (single) | 9 V to 36 V | — |
| Supply Voltage Range (dual) | +/-4.5 V to +/-18 V | — |
| Input Technology | Difet FET with buffered guard drive | — |
| Input Overvoltage Protection | Yes | — |
| Betriebstemperaturbereich | -40C to +85C | [DATA_NEEDED: operating temperature range] |
| Gehäuse | 16-PDIP (N) | 16-pin PDIP |
| Montageart | Through Hole | Through-hole |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Green product |
| Product Type | — | Precision instrumentation amplifier |
| Number of Amplifiers | — | 1 circuit |
| Typical Input Bias Current at 25°C | — | 3 fA |
| Input Bias Current at 85°C | — | 25 fA |
| Maximum Input Offset Voltage | — | 2 mV |
| Typical Input Offset Voltage | — | 5 mV |
| Common-Mode Rejection Ratio | — | 94 dB |
| Bandwidth | — | 800 kHz |
| Slew Rate | — | 0.08 V/µs |
| Supply Voltage Range | — | ±4.5 V to ±18 V |
| Ausgangstyp | — | Single-ended |
| Input Architecture | — | DIFET FET input |
| Guard Drive | — | Buffered guard-drive pins |
| Maximum Input Voltage | — | ±40 V |