INA129PA vs INA129P Vergleich
Detaillierter Direktvergleich von INA129PA von Texas Instruments und INA129P von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | INA129PA | INA129P |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Device Type | Precision, low-power instrumentation amplifier | — |
| Number of Amplifiers | 1 circuit | — |
| Maximum Input Offset Voltage | 50 uV | — |
| Maximum Input Offset Drift | 0.5 uV/degC | — |
| Maximum Input Bias Current | 5 nA | 5 nA |
| Minimum Common-Mode Rejection Ratio | 120 dB | — |
| Maximum Protected Input Voltage | -40 V to +40 V | — |
| Wide Supply Range | Plus or minus 18 V | — |
| Betriebstemperaturbereich | -40 degC to +85 degC | — |
| Gehäuse | 8-pin plastic DIP | 8-pin plastic DIP (PDIP) |
| Montageart | Through-hole | Through-hole |
| Gain-Setting Resistor | 49.4 kilohm | — |
| Gain Equation | [DATA_NEEDED: INA129 gain equation] | — |
| Ruhestrom | [DATA_NEEDED: quiescent current] | — |
| Gain Range | [DATA_NEEDED: gain range] | 1 to 10,000 |
| Gain-Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Maximum Output Voltage | [DATA_NEEDED: maximum output voltage] | — |
| Maximaler Ausgangsstrom | [DATA_NEEDED: maximum output current] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Product Type | — | Precision low-power instrumentation amplifier |
| Amplifier Circuit Count | — | 1 |
| Maximum Offset Voltage | — | 50 uV |
| Maximum Offset Drift | — | 0.5 uV/°C |
| Minimum Common-Mode Rejection | — | 120 dB |
| Input Protection | — | ±40 V |
| Supply Voltage Range | — | ±18 V |
| Bandwidth at Gain 100 | — | 200 kHz |
| Architecture | — | Three-op-amp instrumentation-amplifier design |
| Gain Adjustment | — | Single external resistor |
| Temperature Range | — | -40°C to +85°C |
| Low-Power Feature | — | Low-power instrumentation-amplifier design |
| Current Feedback | — | Yes |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |