INA132U vs INA2134UA Vergleich
Detaillierter Direktvergleich von INA132U von Texas Instruments und INA2134UA von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | INA132U | INA2134UA |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Difference Amplifier | Dual audio differential line receiver |
| Number of Channels | 1 | 2 channels |
| Gain (Nominal) | 1 V/V | — |
| Input Offset Voltage (Typ) | 250 µV | — |
| Supply Voltage Range (Single) | 2.7 V to 36 V | — |
| Supply Voltage Range (Dual) | ±1.35 V to ±18 V | — |
| Quiescent Current (Typ) | 75 µA | — |
| Quiescent Current (Max) | 160 µA | — |
| Small-Signal Bandwidth | 300 kHz | — |
| Slew Rate (Op-Amp Core) | 60 V/µs (typ, equivalent) | — |
| Common-Mode Input Range | Extends to negative supply rail | — |
| Betriebstemperaturbereich | -40°C to +85°C | -40°C to +85°C |
| Gehäuse | 8-pin SOIC | 14-pin SOIC |
| Montageart | Surface Mount | Surface mount |
| MSL-Level | [DATA_NEEDED: MSL level] | — |
| RoHS-Status | Compliant | RoHS compliant |
| Lead-Free | Yes | — |
| Gain Setting | Fixed (internal laser-trimmed thin-film resistors) | — |
| Voltage Gain | — | 1 V/V (0 dB) |
| Total Harmonic Distortion plus Noise | — | 0.0005% at 1 kHz |
| Slew Rate | — | 14 V/µs |
| Supply Voltage Range | — | ±18 V |
| Ruhestrom | — | 2.9 mA maximum |
| Common-Mode Rejection Ratio | — | 90 dB minimum |
| Output Swing | — | Wide output voltage swing |
| Output Drive Capability | — | High output drive |
| Integrated Elements | — | High-performance operational amplifiers with on-chip precision resistors |
| Settling Time | — | 0.01% settling specification |
| Automotive Qualification | — | Not specified |
| Package Dimensions | — | [DATA_NEEDED: package dimensions] |
| Supply Current per Channel | — | [DATA_NEEDED: supply current per channel] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |