INA137PA vs INA2137PA Vergleich
Detaillierter Direktvergleich von INA137PA von Texas Instruments und INA2137PA von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | INA137PA | INA2137PA |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Single audio differential line receiver | Dual audio differential line receiver |
| Number of Channels | 1 channel | — |
| Fixed Gain | 1/2 (-6 dB) or 2 (+6 dB) | — |
| Supply Voltage Range | ±18 V | — |
| Total Supply Voltage | 36 V | — |
| Distortion | 0.0005% at 1 kHz | — |
| Slew Rate | 14 V/µs | — |
| Common-Mode Rejection Ratio | 90 dB | [DATA_NEEDED: common-mode rejection ratio] |
| Ruhestrom | 2.9 mA maximum | — |
| Settling Accuracy | 0.01% | — |
| Gehäuse | 8-pin PDIP | 14-pin PDIP (N) |
| Montageart | Through-hole | Through-hole |
| Internal Resistors | On-chip precision resistors | — |
| Input Signal Type | Differential audio signal | — |
| Ausgangskonfiguration | Single-ended | — |
| Gain Configurations | Resistor reversal selects -6 dB or +6 dB | — |
| Bandwidth | [DATA_NEEDED: bandwidth] | [DATA_NEEDED: bandwidth] |
| Input Impedance | [DATA_NEEDED: input impedance] | — |
| Output Impedance | [DATA_NEEDED: output impedance] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Channel Count | — | 2 channels |
| Nominal Gain Option 1 | — | 0.5 (-6 dB) |
| Nominal Gain Option 2 | — | 2 (+6 dB) |
| Supply Voltage Options | — | 9 V, 12 V, 15 V, 18 V, 24 V, or 28 V |
| Input Configuration | — | Differential |
| Signal Category | — | Audio |
| Manufacturer | — | Texas Instruments |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |
| Eingangsspannungsbereich | — | [DATA_NEEDED: input voltage range] |
| Ausgangsspannungsbereich | — | [DATA_NEEDED: output voltage range] |
| Frequency Response | — | [DATA_NEEDED: frequency response] |
| Noise Performance | — | [DATA_NEEDED: input noise voltage or noise density] |
| Power Dissipation | — | [DATA_NEEDED: power dissipation] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |