INA163UA vs INA166UA Vergleich
Detaillierter Direktvergleich von INA163UA von Texas Instruments und INA166UA von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
INA163UA - Low-Noise Instrumentation Amplifier | Texas Instruments
INA163UA ✓ AktivTexas Instruments
INA166UA - G=2000 Low-Noise Instrumentation Amplifier | TI
INA166UA ⚠ Letzte BestellmöglichkeitSpezifikationsvergleich
| Parameter | INA163UA | INA166UA |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Letzte Kaufgelegenheit |
| Product Type | Low-noise, low-distortion instrumentation amplifier | 1 circuit instrumentation amplifier |
| Architecture | Monolithic current-feedback instrumentation amplifier | Current-feedback |
| Number of Circuits | 1 circuit | 1 circuit |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 50 µV |
| Gain | [DATA_NEEDED: gain configuration] | — |
| Bandwidth | [DATA_NEEDED: bandwidth] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 15 V/µs |
| Input Noise | [DATA_NEEDED: input noise] | — |
| Distortion | [DATA_NEEDED: distortion] | — |
| Maximum Gain | [DATA_NEEDED: maximum gain] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| Gehäuse | 14-pin SOIC | SOIC-14 (D) |
| Montageart | Surface mount | Surface mount |
| RoHS-Status | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Termination/Packing Code | UA package code | — |
| Internal Gain | — | 2000 V/V |
| External Gain Resistor | — | Not required |
| -3 dB Bandwidth | — | 450 kHz |
| Input Bias Current | — | 2.5 µA |
| Anzahl der Pins | — | 14 pins |
| Betriebstemperatur | — | -40 °C to +85 °C |
| Signal Type | — | Low-level differential input |
| Ausgangstyp | — | Single-ended instrumentation-amplifier output |
| Input Common-Mode Rejection | — | [DATA_NEEDED: input common-mode rejection ratio] |
| Rauschdichte | — | [DATA_NEEDED: input noise density] |
| Versorgungsspannung | — | [DATA_NEEDED: supply-voltage range] |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |