INA166UA vs INA137UA Vergleich
Detaillierter Direktvergleich von INA166UA von Texas Instruments und INA137UA von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
INA166UA - G=2000 Low-Noise Instrumentation Amplifier | TI
INA166UA ⚠ Letzte BestellmöglichkeitTexas Instruments
INA137UA - +/-6dB Audio Differential Line Receiver SOIC-8 | Texas Instruments
INA137UA ✓ AktivSpezifikationsvergleich
| Parameter | INA166UA | INA137UA |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Letzte Kaufgelegenheit | Aktiv |
| Product Type | 1 circuit instrumentation amplifier | — |
| Internal Gain | 2000 V/V | — |
| External Gain Resistor | Not required | — |
| -3 dB Bandwidth | 450 kHz | — |
| Slew Rate | 15 V/µs | [DATA_NEEDED: slew rate] |
| Input Offset Voltage | 50 µV | [DATA_NEEDED: input offset voltage typical and maximum] |
| Input Bias Current | 2.5 µA | — |
| Architecture | Current-feedback | — |
| Number of Circuits | 1 circuit | — |
| Anzahl der Pins | 14 pins | — |
| Gehäuse | SOIC-14 (D) | 8-pin SOIC (DBV) |
| Montageart | Surface mount | Surface mount |
| Betriebstemperatur | -40 °C to +85 °C | — |
| Signal Type | Low-level differential input | — |
| Ausgangstyp | Single-ended instrumentation-amplifier output | Differential |
| Input Common-Mode Rejection | [DATA_NEEDED: input common-mode rejection ratio] | — |
| Rauschdichte | [DATA_NEEDED: input noise density] | — |
| Versorgungsspannung | [DATA_NEEDED: supply-voltage range] | +/-18 V maximum (36 V total) |
| Versorgungsstrom | [DATA_NEEDED: supply current] | [DATA_NEEDED: quiescent supply current per amplifier] |
| RoHS-Status | unknown | [DATA_NEEDED: RoHS compliance statement] |
| REACH Status | unknown | — |
| Device Type | — | Audio differential line receiver IC (single channel) |
| Gain | — | -6 dB (G = 1/2) or +6 dB (G = 2), selected by resistor configuration |
| Number of Channels | — | 1 |
| Manufacturer | — | Texas Instruments (Burr-Brown heritage) |
| Delivery Format | — | Tube (UA suffix) |
| Differential Input | — | Yes, balanced input pair (IN+ / IN-) |
| Common-Mode Rejection Ratio (CMRR) | — | [DATA_NEEDED: CMRR minimum/typical at DC and at frequency] |
| Small-Signal Bandwidth | — | [DATA_NEEDED: bandwidth at G = 1/2 and G = 2] |
| Input Noise Density | — | [DATA_NEEDED: input voltage noise density] |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating junction/ambient temperature range] |
| Lead-Free | — | [DATA_NEEDED: lead-free / halogen-free statement] |