ISL4241EIRZ-T vs ISL4241EIRZ Vergleich
Detaillierter Direktvergleich von ISL4241EIRZ-T von Renesas Electronics und ISL4241EIRZ von Renesas Electronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Renesas Electronics
ISL4241EIRZ-T - 3/5 RS-232 Transceiver, ±15kV ESD, 32-QFN | Renesas
ISL4241EIRZ-T ✓ AktivRenesas Electronics
ISL4241EIRZ - 3V RS-232 3TX/5RX Transceiver, ±15kV ESD | Renesas
ISL4241EIRZ ✓ AktivSpezifikationsvergleich
| Parameter | ISL4241EIRZ-T | ISL4241EIRZ |
|---|---|---|
| Marke | Renesas Electronics | Renesas Electronics |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,78 | $2,91 |
| Funktion | RS-232 Transceiver (3 drivers / 5 receivers) | RS-232 Transceiver (Line Driver/Receiver) |
| Protocol | RS-232 (EIA/TIA-232, V.28/V.24) | — |
| Supply Voltage (VCC) | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Datenrate | 250 kbps (max) | 250 kbps |
| ESD Protection (RS-232 pins) | ±15 kV (IEC61000-4-2 Air Gap and HBM) | ±15 kV (HBM and IEC 61000-4-2 Air Gap) |
| Abschaltstrom | 10 nA (typical) | 10 nA |
| Drivers / Receivers | 3 / 5 | — |
| Betriebstemperatur | -40 °C to +85 °C (industrial) | — |
| Gehäuse | 32-QFN (5x5 mm) with exposed pad | 32-QFN (5x5 mm) with Exposed Pad |
| Montageart | Surface Mount | Surface Mount |
| Charge Pump Capacitors | 4 × 0.1 µF external (X7R ceramic) | — |
| MSL-Level | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL level] |
| RoHS-Status | Compliant | Compliant |
| Enable/Shutdown Pin | Yes (active-high SHDN) | — |
| Reception in Shutdown | Yes (per datasheet) | — |
| Number of Transmitters | — | 3 |
| Number of Receivers | — | 5 |
| Transceiver Configuration | — | Full-Duplex (3Tx/5Rx) |
| Betriebstemperaturbereich | — | -40°C to +85°C (Industrial) |
| Compliance | — | EIA/TIA-232, V.28/V.24 (functional down to VCC = 3.0 V) |
| External Capacitors Required | — | 4 × 0.1 µF ceramic charge-pump caps |