ISL83078EIUZA vs ISL83072EIUZA Vergleich
Detaillierter Direktvergleich von ISL83078EIUZA von Renesas Electronics und ISL83072EIUZA von Renesas Electronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Renesas Electronics
ISL83078EIUZA - 3.3V RS-485/422 Transceiver | Renesas | MSOP-8
ISL83078EIUZA ✓ AktivRenesas Electronics
ISL83072EIUZA - 3.3V RS-485/RS-422 Transceiver, 8-MSOP | Renesas
ISL83072EIUZA ✓ AktivSpezifikationsvergleich
| Parameter | ISL83078EIUZA | ISL83072EIUZA |
|---|---|---|
| Marke | Renesas Electronics | Renesas Electronics |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,92 | $1,45 |
| Funktion | Transceiver, RS-422 / RS-485 | Transceiver |
| Number of Drivers / Receivers | 1 / 1 | — |
| Duplex | Half | Half |
| Data Rate (max) | 20 Mbps (high-speed mode) | — |
| Supply Voltage (VCC) | 3.0 V to 3.6 V | — |
| ESD Protection (bus pins, HBM) | ±15 kV | — |
| Receiver Fail-Safe | Full fail-safe (open / short / idle) | Full fail-safe (open, short, terminated, floating) |
| Slew-Rate Control | Yes (SLOPE pin) | — |
| Unit Load | 1 UL (32 nodes per bus) | 1/8 unit load (up to 256 nodes) |
| Quiescent Supply Current | [DATA_NEEDED: ICC typical] | — |
| Betriebstemperatur | -40°C to +85°C | -40 °C to +85 °C (industrial) |
| Gehäuse | MSOP-8 | 8-MSOP |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL rating] | — |
| RoHS-Status | Compliant | Compliant |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Datenrate | — | 500 kbps (slew-rate limited, per family) |
| Versorgungsspannung | — | 3.0 V to 3.6 V (single 3.3V supply) |
| Bus ESD Protection (HBM) | — | ±15 kV (RS-485 bus pins) |
| Other-Pin ESD (HBM) | — | >7 kV |
| Hot Plug Tolerant | — | Yes (Tx/Rx remain three-state during power-up on versions with enable pins) |