ISO1042BDWV vs ISO1042DWVR Vergleich
Detaillierter Direktvergleich von ISO1042BDWV von Texas Instruments und ISO1042DWVR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
ISO1042BDWV - Isolated CAN FD Transceiver 5Mbps 70V | TI (Tape & Reel)
ISO1042BDWV ✓ AktivTexas Instruments
ISO1042DWVR - 5 Mbps Reinforced Isolated CAN | Texas Instruments (Tape & Reel)
ISO1042DWVR ✓ AktivSpezifikationsvergleich
| Parameter | ISO1042BDWV | ISO1042DWVR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Stückpreis (USD) | $1,58 | — |
| Product Type | Isolated CAN transceiver | Digitally isolated CAN transceiver |
| Protocol | CAN / CAN FD (ISO11898-2 2016) | — |
| Datenrate | Up to 5 Mbps (flexible data rate) | — |
| Bus Fault Protection | 70 V | — |
| Working Isolation Voltage | 1060 Vrms | — |
| Isolation Type | Basic isolation, capacitive barrier | Reinforced |
| Logic-Side Supply Range (VCC1) | 1.8 V to 5.5 V | — |
| Bus-Side Supply Range (VCC2) | [DATA_NEEDED: bus-side supply range] | — |
| Loop Delay | 152 ns | 152 ns |
| ESD Protection (Bus Pins) | +/-16 kV HBM | — |
| Duplex | Half duplex, 1 driver / 1 receiver | — |
| Betriebstemperatur | -40C to +125C | — |
| Gehäuse | 8-pin SOIC (DWV), wide body | 8-pin wide-body SOIC (DWV) |
| Montageart | Surface Mount | Surface mount |
| Protection Features | Thermal shutdown, bus fault protection | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status] |
| Classic CAN Data Rate | — | 1 Mbps |
| CAN FD Data Rate | — | 5 Mbps |
| DC Bus Fault Protection | — | ±70 V |
| Common-Mode Voltage Range | — | ±30 V |
| Isolation Withstand Voltage | — | 5000 VRMS |
| CAN Physical-Layer Standard | — | ISO 11898-2:2016 |
| Pin-Anzahl | — | 8 pins |
| Evaluation Module | — | ISO1042DWVREVM |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |