ISO1042DWV vs ISO1042BDWVR Vergleich
Detaillierter Direktvergleich von ISO1042DWV von Texas Instruments und ISO1042BDWVR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
ISO1042DWV - 5 Mbps Reinforced Isolated CAN | Texas Instruments
ISO1042DWV ✓ Aktiv
Spezifikationsvergleich
| Parameter | ISO1042DWV | ISO1042BDWVR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Stückpreis (USD) | — | $1,58 |
| Product Type | Digitally isolated CAN transceiver | Isolated CAN transceiver |
| Classic CAN Data Rate | 1 Mbps | — |
| CAN FD Data Rate | 5 Mbps | — |
| Loop Delay | 152 ns | 152 ns |
| DC Bus Fault Protection | ±70 V | — |
| Common-Mode Voltage Range | ±30 V | — |
| Isolation Withstand Voltage | 5000 VRMS | — |
| CAN Physical-Layer Standard | ISO 11898-2:2016 | — |
| Isolation Type | Reinforced | Basic isolation, capacitive barrier |
| Gehäuse | 8-pin wide-body SOIC (DWV) | 8-pin SOIC (DWV), wide body |
| Pin-Anzahl | 8 pins | — |
| Montageart | Surface mount | Surface Mount |
| Evaluation Module | ISO1042DWVEVM | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Protocol | — | CAN / CAN FD (ISO11898-2 2016) |
| Datenrate | — | Up to 5 Mbps (flexible data rate) |
| Bus Fault Protection | — | 70 V |
| Working Isolation Voltage | — | 1060 Vrms |
| Logic-Side Supply Range (VCC1) | — | 1.8 V to 5.5 V |
| Bus-Side Supply Range (VCC2) | — | [DATA_NEEDED: bus-side supply range] |
| ESD Protection (Bus Pins) | — | +/-16 kV HBM |
| Duplex | — | Half duplex, 1 driver / 1 receiver |
| Betriebstemperatur | — | -40C to +125C |
| Protection Features | — | Thermal shutdown, bus fault protection |