ISO120BG vs ISO120G-BI Vergleich
Detaillierter Direktvergleich von ISO120BG von Texas Instruments und ISO120G-BI von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
ISO120BG - Precision 60kHz Isolation Amplifier | Texas Instruments
ISO120BG ✓ AktivTexas Instruments
ISO120G-BI - 60 kHz Precision Isolation Amplifier | Texas Instruments
ISO120G-BI NrndSpezifikationsvergleich
| Parameter | ISO120BG | ISO120G-BI |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | NRND |
| Product Type | Precision low-cost isolation amplifier | Precision isolation amplifier |
| Number of Circuits | 1 circuit | 1 circuit |
| Bandwidth | 60 kHz | — |
| Nonlinearity | ±0.01% maximum | — |
| Operation Mode | Bipolar operation | — |
| Isolation Voltage | 1500 Vrms | — |
| Partial Discharge Testing | 100% tested | — |
| Isolation Barrier | 2 pF differential capacitive barrier | — |
| Carrier Frequency | User control | User controlled |
| External Components for 60 kHz Bandwidth | No external components required | None required |
| Precision Configuration | Two external capacitors can be added | — |
| Gehäuse | 24-CDIP hermetic DIP, 16 leads | 16-lead CDIP |
| Package Length | 0.300 in (7.62 mm) | 0.300 inch |
| Montageart | Through-hole | Through-hole |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | — |
| Versorgungsspannung | [DATA_NEEDED: supply voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Ausgangsspannung | [DATA_NEEDED: output voltage range] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Gain | [DATA_NEEDED: gain] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Ruhestrom | [DATA_NEEDED: quiescent current] | — |
| Lead Finish | [DATA_NEEDED: lead finish] | — |
| RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Signal Bandwidth | — | 60 kHz |
| Rated Isolation Voltage | — | 1500 Vrms |
| Maximum Nonlinearity | — | 0.01% |
| Precision Configuration Bandwidth | — | 6 kHz |
| Maximum Voltage-Offset Drift | — | 150 uV/°C |
| Input Common-Mode Rejection | — | High at 60 Hz |
| Operation | — | Bipolar |
| Partial Discharge Qualification | — | 100% tested |
| Package Pitch | — | 7.62 mm |
| External Capacitors for Guaranteed Precision | — | 2 capacitors |
| Lifecycle Recommendation | — | Not recommended for new designs |
| RoHS-Status | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |