ISO1430DWR vs ISO1450DW Vergleich
Detaillierter Direktvergleich von ISO1430DWR von Texas Instruments und ISO1450DW von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
ISO1450DW - 50 Mbps 5 kVrms Isolated RS-485/RS-422 | Texas Instruments
ISO1450DW ✓ AktivSpezifikationsvergleich
| Parameter | ISO1430DWR | ISO1450DW |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Galvanically isolated half-duplex RS-485 and RS-422 transceiver | Isolated RS-485/RS-422 transceiver |
| Maximum Data Rate | 12 Mbps | 50 Mbps |
| Isolation Rating | 5 kVrms | — |
| Transceiver Configuration | 1 transmitter and 1 receiver | 1/1 half-duplex |
| Duplex Mode | Half-duplex | — |
| EMC Protection | Protected against ESD and EFT bus events | EMC protected |
| Interface Standards | TIA/EIA RS-485 and RS-422 | — |
| Betriebstemperaturbereich | -40°C to +125°C | -40 °C to 125 °C |
| Gehäuse | 16-pin SOIC (DW) | 16-pin SOIC wide-body (DW) |
| Montageart | Surface mount | Surface mount |
| Logic Supply Voltage | [DATA_NEEDED: logic-side supply voltage] | — |
| Bus-side Supply Voltage | [DATA_NEEDED: bus-side supply voltage] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Common-Mode Transient Immunity | [DATA_NEEDED: common-mode transient immunity] | — |
| ESD Protection Rating | [DATA_NEEDED: ESD protection rating] | — |
| EFT Protection Rating | [DATA_NEEDED: EFT protection rating] | — |
| Isolation Capacitance | [DATA_NEEDED: isolation capacitance] | — |
| Lead Finish | [DATA_NEEDED: lead finish] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Isolation Voltage | — | 5 kVrms |
| Supply Voltage Range | — | 1.71 V to 5.5 V |
| Supported Standards | — | TIA/EIA RS-485 and RS-422 |
| Differential Communication | — | Yes |
| Direction Control | — | Half-duplex |
| Isolation Type | — | Galvanic isolation |
| Logic Compatibility | — | 1.71 V to 5.5 V supply operation |
| Manufacturer Evaluation Module | — | ISO1410DWEVM for related ISO1410 evaluation |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |