ISO1450BDWR vs ISO1450BDW Vergleich
Detaillierter Direktvergleich von ISO1450BDWR von Texas Instruments und ISO1450BDW von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
ISO1450BDWR - 50Mbps 5kVrms Isolated RS-485/RS-422 Transceiver | Texas Instruments
ISO1450BDWR ✓ AktivTexas Instruments
ISO1450BDW - 50Mbps 5kVrms RS-485/422 Isolated Transceiver | TI
ISO1450BDW ✓ AktivSpezifikationsvergleich
| Parameter | ISO1450BDWR | ISO1450BDW |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,95 | $4,10 |
| Funktion | Isolated half-duplex RS-485 / RS-422 transceiver | — |
| Data Rate (max) | 50 Mbps | — |
| Isolation Voltage (rms) | 5 kVrms (reinforced) | 5000 Vrms (per UL 1577) |
| Number of Drivers / Receivers | 1/1 | — |
| Duplex | Half | Half |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis voltage] | — |
| Supply Voltage VCC1 (logic side) | 3 V to 5.5 V | — |
| Supply Voltage VCC2 (bus side) | Internally generated by isolated DC-DC | — |
| Bus Pin ESD (IEC 61000-4-2) | ±16 kV (air / contact, per datasheet) | — |
| Bus Pin ESD (HBM) | ±4 kV | — |
| IEC 61000-4-4 EFT Immunity | ±4 kV | — |
| Surge Immunity | [DATA_NEEDED: IEC 61000-4-5 surge rating] | — |
| Unit Load | 1/8 (up to 256 nodes on bus) | — |
| Common-Mode Range | Wide common-mode bus voltage range (per datasheet) | — |
| Thermisches Abschalten | Yes | — |
| Current Limiting | Yes | — |
| Low-Power Standby | Yes | — |
| Betriebstemperatur | -40C to +125C | — |
| Gehäuse | SOIC-16 wide-body (DW), 16 pins | SOIC-16 wide-body (DW) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 3 (per JEDEC J-STD-020) | 2 (1 year floor life) [DATA_NEEDED: confirm from datasheet] |
| RoHS-Status | Compliant | Compliant |
| Compliance Standards | TIA/EIA-485-A, TIA/EIA-422, IEC 61000-4-2, IEC 61000-4-4 | — |
| Protocol | — | RS-422, RS-485 (TIA/EIA-485-A, TIA/EIA-422-B) |
| Number of Drivers/Receivers | — | 1/1 |
| Maximum Data Rate | — | 50 Mbps |
| Working Isolation Voltage (VIOWM) | — | 1060 Vrms |
| Surge Isolation Voltage (VIOSM) | — | 10000 Vpk |
| Integrated Isolated Power | — | No |
| Supply Voltage (VCC1, VCC2) | — | 3 V to 5.5 V [DATA_NEEDED: each rail tolerance] |
| Bus Common-Mode Voltage Range | — | -7 V to +12 V [DATA_NEEDED: confirmed in datasheet] |
| Bus Pins ESD (IEC 61000-4-2) | — | [DATA_NEEDED: contact/air discharge level] |
| Bus Pins EFT (IEC 61000-4-4) | — | [DATA_NEEDED: transient level] |
| Betriebstemperaturbereich | — | -40 C to +125 C |