ISO1500DBQR vs ADM2582EBRWZ Vergleich
Detaillierter Direktvergleich von ISO1500DBQR von Texas Instruments und ADM2582EBRWZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | ISO1500DBQR | ADM2582EBRWZ |
|---|---|---|
| Marke | Texas Instruments | Analog Devices |
| Kategorie | Interface ICs | RS-485/RS-422 |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,00 | $5,50 |
| Product Type | Isolated RS-485/RS-422 transceiver | — |
| Datenrate | Up to 1 Mbps | 16 Mbps |
| Duplex Mode | Half-duplex | — |
| Isolation Voltage | 3 kVrms | 2500 Vrms |
| Supported Standards | TIA/EIA RS-485 and RS-422 | — |
| Digital Isolation Channels | 3-channel digital isolator | — |
| Gehäuse | 16-pin SSOP | 20-SOIC (0.295", 7.50mm Width) |
| Bus Protection | Protected against IEC ESD contact discharge and IEC EFT events | — |
| Receiver Failsafe | Failsafe for bus open, short, and idle conditions | — |
| Versorgungsspannung | [DATA_NEEDED: supply-voltage range] | 3.3 V to 5 V |
| Propagation Delay | [DATA_NEEDED: propagation delay] | 50 ns (typical) |
| Receiver Threshold | [DATA_NEEDED: differential receiver threshold] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: bus common-mode voltage range] | — |
| Betriebstemperaturbereich | -40 C to +125 C | — |
| RoHS-Status | ROHS3 compliant | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance] | — |
| MSL | MSL Level-2-260C-1 YEAR | — |
| Montageart | Surface mount | Surface Mount |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Common-Mode Transient Immunity | — | 25 kV/µs |
| ESD Protection | — | ±15 kV (HBM) |
| Number of Channels | — | 2 |
| Duplex | — | Full/Half |
| Number of Nodes | — | 64 |
| Betriebstemperatur | — | -40°C to +85°C |
| Skew | — | 5 ns (typical) |
| Isolation Technology | — | isoPower, iCoupler |