ISP752TFUMA1 vs BTS500101TAEATMA1 Vergleich
Detaillierter Direktvergleich von ISP752TFUMA1 von Infineon und BTS500101TAEATMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
BTS500101TAEATMA1 - 40A Smart High-Side Switch | Infineon | 12V Loads
BTS500101TAEATMA1 ✓ AktivSpezifikationsvergleich
| Parameter | ISP752TFUMA1 | BTS500101TAEATMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,02 | $2,58 |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch (N-channel, 1:1) |
| Series | PROFET™ Industrial | — |
| Switch Configuration | 1:1 (Single channel) | — |
| Ausgangskonfiguration | High-Side | — |
| Ausgangstyp | N-Channel | — |
| On-Resistance (Ron) | 200 mOhm | — |
| Continuous Load Current | 1.3 A | — |
| Betriebsversorgungsspannung | 6 V to 52 V | — |
| Input Type | Non-Inverting (logic-level) | — |
| Betriebstemperatur | -30 C to +85 C | — |
| Gehäuse / Bauform | PG-DSO-8-24 (DSO-8 with exposed pad) | — |
| Montageart | Surface Mount | Surface Mount (exposed thermal pad) |
| Fault Protection | Overcurrent; Short-Circuit; Overtemperature; Overvoltage (load-dump); Reverse voltage | — |
| Diagnostic Output | Status flag | — |
| RoHS-Status | Compliant | Compliant |
| Topologie | — | High-side switch with charge pump |
| On-State Resistance R_DS(on) (typ) | — | 1.0 mΩ |
| Maximum Continuous Load Current | — | 40 A DC (per datasheet family) |
| Rated Load Current (per DigiKey listing) | — | 48 A |
| Peak Load Current | — | 250 A |
| Nominal Supply Voltage Vbb | — | 12 V (automotive) |
| Operating Voltage Range | — | 6 V to 18 V (per family) |
| Logic Input Compatibility | — | 3.3 V / 5 V CMOS/TTL |
| Current Sense Output | — | Yes (IS pin, analog current mirror) |
| Protection Features | — | Overcurrent, Overtemperature, Short-to-GND, Short-to-Battery, Overvoltage |
| Diagnostic Feedback | — | Load current sense + fault flag |
| Gehäuse | — | PG-TO-263-7-10 (D2PAK-7) |
| Betriebstemperaturbereich | — | -40 °C to +150 °C (junction) |
| Automotive Qualification | — | AEC-Q100 (per Infineon family datasheet) |