ITS4130QEPDXUMA1 vs TLE75004EPDXUMA1 Vergleich
Detaillierter Direktvergleich von ITS4130QEPDXUMA1 von Infineon und TLE75004EPDXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | ITS4130QEPDXUMA1 | TLE75004EPDXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,88 | $0,93 |
| Topologie | High-Side Power Switch (1:1) | — |
| Number of Channels | 4 (Quad) | 4 |
| On-State Resistance RDS(ON) | 130 mΩ (typ at Tj=25°C), 205 mΩ (typ at Tj=125°C) | — |
| Per-Channel Current | 650 mA (DC, per channel) | — |
| Load-Dump Tolerance | 45 V | — |
| Switch Type | N-Channel MOSFET | — |
| Gehäuse | PG-TSDSO-14 (14-pin, exposed pad) | PG-TSDSO-14-41 (exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperatur | -40C to +125C (Tj) | — |
| Fault Protection | Over-current, Over-temperature, Over-voltage, Open-load detection | — |
| Diagnostic Output | Yes (status/feedback pin) | — |
| Reverse Polarity Protection | Achievable with external 150Ω GND resistor or GND diode+27Ω series resistor | — |
| Family | PROFET Industrial (ITS41xxQ-EP-D series) | — |
| Product Status | Active / Production | — |
| RoHS-Status | Compliant | — |
| MSL-Level | MSL3 (per Infineon package handling guidelines) | 2A |
| Product Type | — | Low-side power switch |
| On-State Resistance (Rdson) per Channel | — | [DATA_NEEDED: Rdson per channel] |
| Continuous Drain Current per Channel | — | 470 mA |
| Load Voltage (Vbb) | — | [DATA_NEEDED: Vbb max] |
| Anzahl der Ausgänge | — | 4 |
| Input Type | — | SPI (16-bit) + parallel input pins |
| SPI Clock Frequency | — | up to 5 MHz |
| Betriebstemperaturbereich | — | -40 °C to +150 °C |
| Terminal Finish | — | Tin (Sn) |
| JEDEC / JESD-609 | — | e3 |
| Qualification | — | AEC-Q100 |
| Special Features | — | 3 V cranking, Limp Home (fail-safe) mode, open-load detection |