ITS4141NHUMA1 vs BTS4140NHUMA1 Vergleich
Detaillierter Direktvergleich von ITS4141NHUMA1 von Infineon und BTS4140NHUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | ITS4141NHUMA1 | BTS4140NHUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,95 | $0,58 |
| Topologie | High-side N-channel MOSFET switch with charge pump | 1:1 N-Channel High-Side |
| Ausgangskonfiguration | 1:1 (single channel) | — |
| Load Supply Voltage (V_S) | -10 V to 48 V (operational); 12 V to 45 V nominal per datasheet | — |
| Continuous Output Current | 700 mA | — |
| On-State Resistance R_DS(on) | 200 mΩ (typ, 25 °C) | — |
| Input Logic Level | CMOS-compatible 3.3 V / 5 V | — |
| Overvoltage Protection | Load-dump tolerant | — |
| Short-Circuit Protection | Current limitation | — |
| Undervoltage Shutdown | Auto-restart with hysteresis | — |
| Status Output | Open-drain diagnostic pin | — |
| Betriebstemperatur | -40 °C to +85 °C | — |
| Gehäuse | PG-SOT223-4 (TO-261-4, 3 leads + tab) | PG-SOT223-4 (TO-261-4) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 1 (per JEDEC J-STD-020) | [DATA_NEEDED: MSL rating] |
| RoHS-Status | Compliant | Compliant |
| Product Family | PROFET Industrial (ITS41x1N) | — |
| Product Type | — | Smart High-Side Power Switch |
| Number of Channels | — | 1 |
| Continuous Load Current | — | 200 mA |
| On-Resistance (Ron, typ @ 25 C) | — | 1.2 ohm |
| Operating Voltage Range | — | 6 V to 62 V |
| Load Dump Tolerance | — | Yes (overvoltage protection) |
| Input Type | — | Current-controlled CMOS-compatible |
| Diagnostic Output | — | Status flag (active low in fault) |
| Protection Features | — | Current limit, short-circuit shutdown, thermal shutdown, overvoltage (load dump), undervoltage shutdown |
| Inductive Load Clamping | — | Integrated (internal Vds clamp) |
| Betriebstemperaturbereich | — | -40 C to +150 C (Tj) |