ITS4141NHUMA1 vs ITS4140NHUMA1 Vergleich
Detaillierter Direktvergleich von ITS4141NHUMA1 von Infineon und ITS4140NHUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | ITS4141NHUMA1 | ITS4140NHUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,95 | $0,72 |
| Topologie | High-side N-channel MOSFET switch with charge pump | 1:1 (Input to Output) |
| Ausgangskonfiguration | 1:1 (single channel) | — |
| Load Supply Voltage (V_S) | -10 V to 48 V (operational); 12 V to 45 V nominal per datasheet | — |
| Continuous Output Current | 700 mA | — |
| On-State Resistance R_DS(on) | 200 mΩ (typ, 25 °C) | — |
| Input Logic Level | CMOS-compatible 3.3 V / 5 V | — |
| Overvoltage Protection | Load-dump tolerant | Yes (including load dump) |
| Short-Circuit Protection | Current limitation | Yes (current limit + thermal shutdown) |
| Undervoltage Shutdown | Auto-restart with hysteresis | — |
| Status Output | Open-drain diagnostic pin | — |
| Betriebstemperatur | -40 °C to +85 °C | — |
| Gehäuse | PG-SOT223-4 (TO-261-4, 3 leads + tab) | PG-SOT223-4 (3+Tab) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 1 (per JEDEC J-STD-020) | 1 (per JEDEC J-STD-020) |
| RoHS-Status | Compliant | Compliant |
| Product Family | PROFET Industrial (ITS41x1N) | — |
| Funktion | — | High-Side Power Switch / Load Driver |
| Switch Type | — | N-Channel (vertical, integrated) |
| Output Current (Continuous) | — | 200 mA |
| Supply Voltage Range (Vbb) | — | 4.9 V to 60 V |
| Load Dump Withstand | — | [DATA_NEEDED: load-dump transient rating per ISO 7637] |
| On-Resistance (RDS(on)) | — | [DATA_NEEDED: typical RDS(on) in ohms] |
| Overload Protection | — | Yes |
| Inductive Load Clamping | — | Yes (active negative-voltage clamp at output) |
| Diagnostic Output | — | Yes (status/IN pin feedback) |
| Betriebstemperaturbereich | — | -40 C to +125 C |
| Automotive Qualified | — | [DATA_NEEDED: AEC-Q100 grade] |