ITS711L1FUMA1 vs ISP752TFUMA1 Vergleich
Detaillierter Direktvergleich von ITS711L1FUMA1 von Infineon und ISP752TFUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
ITS711L1FUMA1 - 4-Ch Smart High-Side Switch 1.7A PG-DSO-20 | Infineon
ITS711L1FUMA1 ✓ Aktiv
Spezifikationsvergleich
| Parameter | ITS711L1FUMA1 | ISP752TFUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,98 | $1,02 |
| Switch Type | High-Side Power Switch | — |
| Anzahl der Ausgänge | 4 | — |
| Input:Output Ratio | 1:1 | — |
| Ausgangskonfiguration | High Side | High-Side |
| Ausgangstyp | N-Channel | N-Channel |
| Continuous Output Current (per channel) | 1.7 A | — |
| Maximum Load Current (package) | 4.4 A | — |
| Load Voltage Range | 5 V to 34 V | — |
| Supply Voltage (Vcc) | Not Required (Logic-level inputs) | — |
| Input Interface | CMOS-compatible, ground-referenced | — |
| Technology | Smart SIPMOS (vertical N-channel DMOS + CMOS logic) | — |
| On-State Resistance (Rdson) | [DATA_NEEDED: Rdson per channel] | — |
| Diagnostic Feedback | Yes (open-drain status output) | — |
| Embedded Protection | Over-load, Over-voltage, Over-temperature, Short-circuit | — |
| Gehäuse | PG-DSO-20-31 (DSO-20) | — |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperatur | -40C to +85C | -30 C to +85 C |
| Series | PROFET Industrial | PROFET™ Industrial |
| RoHS-Status | Compliant | Compliant |
| Product Type | — | Smart High-Side Power Switch |
| Switch Configuration | — | 1:1 (Single channel) |
| On-Resistance (Ron) | — | 200 mOhm |
| Continuous Load Current | — | 1.3 A |
| Betriebsversorgungsspannung | — | 6 V to 52 V |
| Input Type | — | Non-Inverting (logic-level) |
| Gehäuse / Bauform | — | PG-DSO-8-24 (DSO-8 with exposed pad) |
| Fault Protection | — | Overcurrent; Short-Circuit; Overtemperature; Overvoltage (load-dump); Reverse voltage |
| Diagnostic Output | — | Status flag |