ITS716GFUMA1 vs BTT60302ERBXUMA1 Vergleich
Detaillierter Direktvergleich von ITS716GFUMA1 von Infineon und BTT60302ERBXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
BTT60302ERBXUMA1 - 4A Dual-Channel High-Side PROFET Switch | Infineon
BTT60302ERBXUMA1 ✓ AktivSpezifikationsvergleich
| Parameter | ITS716GFUMA1 | BTT60302ERBXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $3,22 | $1,21 |
| Product Type | Smart High-Side Power Switch | — |
| Number of Channels | 4 | — |
| Ausgangskonfiguration | High-side (N-Channel MOSFET) | — |
| Continuous Current per Channel | 2.3 A | — |
| On-State Resistance (RON) per Channel | [DATA_NEEDED: Ron typical value] | — |
| Operating Voltage Range (Vbb) | 5 V to 36 V | — |
| Load Dump Tolerance | Up to 45 V | — |
| Standby Current | [DATA_NEEDED: Iq standby typical] | — |
| Input Logic Levels | CMOS/TTL compatible, parallel interface | — |
| Diagnostic Output | Open-drain fault flag, one per channel | Yes (status feedback pin) |
| Protection Features | Overload, short-circuit, over-temperature, over-voltage, ESD | — |
| PWM Capability | Up to 1 kHz | — |
| Betriebstemperaturbereich | -40 C to +85 C (industrial grade) | -40 C to +150 C |
| Gehäuse | PG-DSO-20-32 (20-pin SOIC, exposed pad) | PG-TDSO-14-31 (14-pin SOIC with Exposed Pad) |
| Wärmewiderstand, Sperrschicht-Umgebung | [DATA_NEEDED: theta_JA value] | — |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL level] |
| RoHS-Status | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Product Family | — | PROFET (Protected MOSFET) |
| Switch Type | — | High-Side N-Channel Power Switch |
| Anzahl der Ausgänge | — | 2 |
| Input-Output Ratio | — | 1:1 |
| Maximum Output Current (per channel) | — | 4 A |
| Typical Rds(on) | — | 32 mOhm |
| Eingangsspannungsbereich | — | -0.3 V to 6 V (logic) |
| Load Voltage Range | — | 24 V / 48 V nominal (PROFET 24V/48V family) |
| Automotive Qualification | — | AEC-Q100 |
| Integrated Protection | — | Over-current, over-voltage, over-temperature, short-circuit, reverse battery |
| Lead-Free / RoHS | — | Yes / Compliant |
| Packing | — | Tape & Reel (Rexx suffix per Infineon naming) |