K4A4G165WD-BCTD vs MT40A256M16GE-075E:B Vergleich
Detaillierter Direktvergleich von K4A4G165WD-BCTD von Samsung Electronics und MT40A256M16GE-075E:B von Micron Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Micron Technology
MT40A256M16GE-075E:B - 4Gb DDR4 SDRAM 2666 MT/s | Micron
MT40A256M16GE-075E:B ✓ AktivSpezifikationsvergleich
| Parameter | K4A4G165WD-BCTD | MT40A256M16GE-075E:B |
|---|---|---|
| Marke | Samsung Electronics | Micron Technology |
| Kategorie | Memory ICs | Memory ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $19,00 | $3,95 |
| Speichertyp | DDR4 SDRAM | DDR4 SDRAM |
| Density | 4 Gbit | — |
| Speicherorganisation | 256M x 16 | 256M x 16 |
| Datenrate | 2666 Mbps/pin (-BCTD speed grade) | 2666 MT/s (DDR4-2666) |
| Supply Voltage (VDD) | 1.2 V | — |
| Core Supply (VPP) | 2.5 V | — |
| Schnittstelle | SSTL-12 | — |
| Data Mask | Yes (DM per byte lane) | — |
| Bank Architecture | 16 banks / 4 bank groups | — |
| Gehäuse | 96-ball FBGA | 96-FBGA (9 x 14 mm) |
| Montageart | Surface Mount (BGA) | Surface Mount |
| Betriebstemperatur | 0C to +85C (commercial) | [DATA_NEEDED: operating temperature range for standard grade] |
| On-Die Termination | Dynamic ODT | — |
| ZQ Calibration | Yes (external RZQ resistor) | — |
| CRC / CA Parity | CRC read/write support | — |
| Reset | Asynchronous reset (RESET_n) | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | — |
| Speichergröße | — | 4 Gbit |
| Memory Interface | — | Parallel |
| Clock Frequency | — | 1.33 GHz |
| VDD / VDDQ | — | 1.2 V +/-60 mV |
| VPP | — | 2.5 V, -125 mV/+250 mV |
| Internal Banks | — | 16 |
| Refresh | — | 64 ms / 8192-cycle; 32 ms / 8192-cycle at 95C |
| I/O Type | — | 1.2 V pseudo open-drain |
| VREFDQ | — | On-die, internal, adjustable generation |
| Special Features | — | Temperature controlled refresh (TCR) |
| Access Time | — | [DATA_NEEDED: CAS latency / access time] |