KSZ8041RNL vs KSZ8051RNL Vergleich

Detaillierter Direktvergleich von KSZ8041RNL von Microchip Technology und KSZ8051RNL von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Microchip Technology
KSZ8041RNL KSZ8041RNL - 10/100BASE-TX RMII PHY | Microchip Technology

KSZ8041RNL - 10/100BASE-TX RMII PHY | Microchip Technology

KSZ8041RNL ✓ Aktiv
Microchip Technology
KSZ8051RNL KSZ8051RNL - 100BASE-TX Ethernet PHY | Microchip | Automotive

KSZ8051RNL - 100BASE-TX Ethernet PHY | Microchip | Automotive

KSZ8051RNL ✓ Aktiv

Spezifikationsvergleich

Parameter KSZ8041RNL KSZ8051RNL
Marke Microchip Technology Microchip Technology
Kategorie Interface ICs Ethernet PHYs
Lebenszyklusstatus Aktiv Aktiv
Product Type 10BASE-T/100BASE-TX physical-layer transceiver 10BASE-T/100BASE-TX Ethernet physical-layer transceiver
Ethernet Data Rate 10 Mb/s and 100 Mb/s —
Host Interface Full RMII —
Number of Drivers/Receivers 1/1 —
Supply Voltage Range 3.135 V to 3.465 V —
Supply Configuration Single supply —
Input Reference Clock 25 MHz crystal —
RMII Reference Output 50 MHz to the media access controller —
External 50 MHz System Clock Not required for the RNL version —
Gehäuse 32-VFQFN exposed-pad package, 5 mm x 5 mm 32-pin QFN, 5 mm x 5 mm
Montageart Surface mount Surface mount
Lead-Free Package Option Yes, 32-pin lead-free QFN package —
Power-Down Configuration Configurable through power-up strapping —
Speed and Duplex Configuration Configurable through power-up strapping —
Auto-Negotiation Configuration Configurable through power-up strapping —
PHY Address Configuration Configurable through power-up strapping —
Ethernet Magnetics External 10/100BASE-TX magnetic isolation required —
RoHS-Status [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance status] [DATA_NEEDED: REACH status]
Manufacturer — Microchip Technology
Supported Ethernet Speeds — 10 Mbps and 100 Mbps
MAC Interface — RMII
Supply Type — Single supply
Nominal Supply Voltage — 3.3 V
Automotive Qualification — AEC-Q100 standard qualified
Termination — 10BASE-T on-chip termination resistors
Management Interface — MDC/MDIO management
RMII Reference Clock — 50 MHz
Pin-Anzahl — 32 pins
Lead Finish — Lead-free
Ethernet Cable Type — Twisted-pair 10BASE-T/100BASE-TX
Betriebstemperaturbereich — [DATA_NEEDED: operating temperature range]
Maximum Data Rate — 100 Mbps

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern