KSZ8041TL-S vs KSZ8041TL Vergleich

Detaillierter Direktvergleich von KSZ8041TL-S von Microchip Technology und KSZ8041TL von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Microchip Technology
KSZ8041TL-S KSZ8041TL-S - 10/100 Ethernet PHY | Microchip Technology

KSZ8041TL-S - 10/100 Ethernet PHY | Microchip Technology

KSZ8041TL-S ✓ Aktiv
Microchip Technology
KSZ8041TL KSZ8041TL 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TL 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TL ✓ Aktiv

Spezifikationsvergleich

Parameter KSZ8041TL-S KSZ8041TL
Marke Microchip Technology Microchip Technology
Kategorie Interface ICs Interface ICs
Lebenszyklusstatus Aktiv Aktiv
Device Type 10/100BASE-TX Ethernet physical-layer transceiver Ethernet interface IC / physical-layer transceiver
Number of Drivers 1 driver —
Number of Receivers 1 receiver —
Supply Voltage Range 3.135 V to 3.465 V —
Supply Configuration Single supply —
Supported Copper Ethernet Rates 10BASE-T and 100BASE-TX —
Host Interface MII, RMII, and SMII —
Gehäuse 48-TQFP, 7 mm x 7 mm 48-TQFP (7 x 7 mm)
Montageart Surface mount Surface mount
Target Packaging Tray —
Signaling Design Mixed-signal design —
100BASE-FX Support Not supported in KSZ8041TL-S —
Maximum Ethernet Data Rate 100 Mbit/s —
Minimum Ethernet Data Rate 10 Mbit/s —
Betriebstemperatur [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
RoHS-Status [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification Not applicable —
Automotive MDI/MDIX Support [DATA_NEEDED: automotive MDI/MDIX support] —
Media Interface Copper Ethernet through external magnetics —
Configuration Mechanism Power-up PHY strapping pins —
Product Type — 10BASE-T/100BASE-TX Ethernet physical-layer transceiver
Supported Data Rates — 10 Mb/s and 100 Mb/s
Host Interfaces — MII, RMII, and SMII
Supply Architecture — Single-supply
Cable Standard — 10BASE-T and 100BASE-TX
Mixed-Signal Design — Yes; intended to extend signaling distance while reducing power consumption
Auto MDI/MDIX — HP Auto MDI/MDIX
Interrupt Signal — INTRP on pin 32; optional PHY-register status-update signal
Number of Drivers/Receivers — 1 driver and 1 receiver
Versorgungsspannung — [DATA_NEEDED: supply voltage range]
Interface Clock — [DATA_NEEDED: clock frequency]
Ethernet Magnetics — [DATA_NEEDED: supported magnetics and isolation configuration]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern