KSZ8041TL vs KSZ8041MLL Vergleich
Detaillierter Direktvergleich von KSZ8041TL von Microchip Technology und KSZ8041MLL von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | KSZ8041TL | KSZ8041MLL |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Interface ICs | Ethernet PHYs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | 10BASE-T/100BASE-TX Ethernet physical-layer transceiver | — |
| Supported Data Rates | 10 Mb/s and 100 Mb/s | — |
| Host Interfaces | MII, RMII, and SMII | — |
| Supply Architecture | Single-supply | — |
| Cable Standard | 10BASE-T and 100BASE-TX | — |
| Mixed-Signal Design | Yes; intended to extend signaling distance while reducing power consumption | — |
| Auto MDI/MDIX | HP Auto MDI/MDIX | — |
| Interrupt Signal | INTRP on pin 32; optional PHY-register status-update signal | — |
| Number of Drivers/Receivers | 1 driver and 1 receiver | — |
| Device Type | Ethernet interface IC / physical-layer transceiver | — |
| Gehäuse | 48-TQFP (7 x 7 mm) | 48-LQFP |
| Montageart | Surface mount | Surface mount |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | — |
| Versorgungsspannung | [DATA_NEEDED: supply voltage range] | 3.3 V |
| Interface Clock | [DATA_NEEDED: clock frequency] | — |
| Ethernet Magnetics | [DATA_NEEDED: supported magnetics and isolation configuration] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Ethernet Data Rate | — | 10 Mb/s and 100 Mb/s |
| Supported Physical Media | — | 10BASE-T and 100BASE-TX |
| Host Interface | — | Full MII |
| Supply Configuration | — | Single supply |
| Transceiver Count | — | 1 |
| Port Count | — | 1 Ethernet port |
| Package Body Size | — | 7 mm x 7 mm |
| Pin-Anzahl | — | 48 pins |
| Automatic Crossover | — | HP Auto MDI/MDIX |
| Strapping Configuration | — | Speed, duplex, auto-negotiation, power-down, and PHY address |
| Strapping Latching | — | Power-up and reset |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |
| Maximum Link Distance | — | [DATA_NEEDED: maximum link distance] |
| Power Consumption | — | [DATA_NEEDED: power consumption] |