L6566BHTR vs ICE3A2065Z Vergleich
Detaillierter Direktvergleich von L6566BHTR von STMicroelectronics und ICE3A2065Z von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
L6566BHTR - Multimode SMPS PWM Controller, 16-SO | STMicroelectronics
L6566BHTR ✓ Aktiv
Spezifikationsvergleich
| Parameter | L6566BHTR | ICE3A2065Z |
|---|---|---|
| Marke | STMicroelectronics | Infineon |
| Kategorie | Voltage Regulators | DC-DC Converters |
| Lebenszyklusstatus | Aktiv | NRND |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,44 | $0,58 |
| Product Type | Current-mode primary PWM controller | — |
| Topologie | Offline flyback (forward-capable) | Flyback (off-line SMPS current-mode controller) |
| Operating Mode | Multimode: fixed-frequency + quasi-resonant valley-switching | — |
| Input Voltage (VCC) | 8 V to 23 V | — |
| Input Voltage (Mains) | Up to 800 V on HV start-up pin | — |
| Switching Frequency Range | 10 kHz to 300 kHz | — |
| Ruhestrom | 3 mA | — |
| High-Voltage Start-up | On-board 800 V start-up cell | — |
| Output Power Capability | Up to 750 mW (controller dissipation) | — |
| Control Method | Peak current-mode with line feed-forward | — |
| Gehäuse | 16-SOIC (0.154", 3.90 mm width) | PG-DIP-7-1 (7-pin PDIP through-hole) |
| Montageart | Surface Mount | Through-Hole (THT) |
| Packaging | Cut Tape (CT) / Tape & Reel | — |
| Betriebstemperatur | -40 °C to +150 °C (junction) | — |
| Halogenfrei | Compliant | — |
| RoHS | Compliant | — |
| Schaltfrequenz | — | 100 kHz fixed |
| Integrated Power Switch | — | 650V Depletion CoolMOS |
| Drain-Source Breakdown Voltage (VDS max) | — | 650 V |
| On-Resistance (RDS(on) max) | — | 1.05 ohm |
| Maximum Drain Current (ID max) | — | 2.0 A pulsed |
| Maximum Output Power | — | 28 W (typical adapter application) |
| VCC Supply Voltage Range | — | 8.5 V to 21 V |
| Quiescent Current (ICC) | — | 7.1 mA |
| Betriebs-Sperrschichttemperatur | — | -25 °C to +130 °C |
| Thermal Resistance Junction-to-Ambient (RthJA) | — | 96 K/W |
| ESD Protection (HBM) | — | 3.0 kV |
| Burst Mode | — | Active Burst Mode (standby < 100 mW at no load) |
| Lead-Free / RoHS | — | Compliant (per device spec excerpt) |
| Recommended Replacement | — | ICE3A2065ELJ (new design only; different package) |