LM248DT vs LM324D Vergleich
Detaillierter Direktvergleich von LM248DT von STMicroelectronics und LM324D von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
LM324D - Quad 36V Op Amp | Texas Instruments | SOIC-14 (Tape & Reel)
LM324D ✓ AktivSpezifikationsvergleich
| Parameter | LM248DT | LM324D |
|---|---|---|
| Marke | STMicroelectronics | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | Quad general-purpose bipolar operational amplifier | Quad general-purpose operational amplifier |
| Number of Amplifiers | 4 circuits | 4 |
| Gain-Bandwidth Product | 1.3 MHz | — |
| Slew Rate | 0.5 V/µs | [DATA_NEEDED: slew rate] |
| Supply Current per Amplifier | 0.53 mA | — |
| Input Offset Voltage | 1 mV maximum | Plus or minus 2 mV maximum for BA versions at 25 C |
| Input Offset Current | 2 nA maximum | — |
| Input Bias Current | 30 nA maximum | [DATA_NEEDED: input bias current] |
| Compensation | Internally compensated | — |
| Output Stage | Class AB | — |
| Crossover Distortion | No crossover distortion | — |
| Pin Compatibility | Compatible with LM224 and LM324 | — |
| Amplifier Isolation | High degree of isolation between amplifiers | — |
| Gehäuse | 14-pin SOIC | 14-pin SOIC |
| Montageart | Surface mount | Surface mount |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 3 V to 36 V for B versions |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| RoHS-Status | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Architecture | — | Four independent high-gain frequency-compensated operational amplifiers |
| ESD Protection | — | 2 kV HBM for B, BA, and K versions |
| Input Filtering | — | Internal RF and EMI filter for B and BA versions |
| Supply Configuration | — | Single supply or split supply |
| Frequency Compensation | — | Internal |
| Device Type | — | Low-power operational amplifier |
| Input Type | — | Differential input |
| Ausgangstyp | — | Single-ended output |
| Operating Class | — | Standard general purpose |
| AEC-Q100 Status | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Gain Bandwidth Product | — | [DATA_NEEDED: gain bandwidth product] |
| Output Current | — | [DATA_NEEDED: output current] |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input range] |
| Output Swing | — | [DATA_NEEDED: output swing] |